Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

Shudder at deceleration

Thread Tools
 
Search this Thread
 
Old 10-19-2004, 10:44 PM
  #1  
TECH Senior Member
Thread Starter
iTrader: (9)
 
slowprocess's Avatar
 
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes on 0 Posts

Default Shudder at deceleration

My new built 4l60e shifts so good now. My only concern is I get a shudder every once in a while when I am decelerating coming to a stop. I don't know that it's in the tranny, but it feels like it to me. Does this happen to anyone else, and is it something I should be worried about? Thanks guys.
Old 10-19-2004, 11:10 PM
  #2  
TECH Enthusiast
 
derek_silvy's Avatar
 
Join Date: Jul 2004
Posts: 521
Likes: 0
Received 0 Likes on 0 Posts
Default

I can't help you, as I am no tranny expert.... but to help the guys help you:

Where (speed, gear and rpms) is it shuddering?
Does it feel like a little whobble in the back of your seat or an all out "rattle to peices" shake?
Also, jsut how often does it do it. Once every 5 decelerations, 10, 20...?
Old 10-20-2004, 11:43 AM
  #3  
TECH Senior Member
Thread Starter
iTrader: (9)
 
slowprocess's Avatar
 
Join Date: Aug 2003
Location: Cleveland Mississippi
Posts: 6,204
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by derek_silvy
I can't help you, as I am no tranny expert.... but to help the guys help you:

Where (speed, gear and rpms) is it shuddering?
Does it feel like a little whobble in the back of your seat or an all out "rattle to peices" shake?
Also, jsut how often does it do it. Once every 5 decelerations, 10, 20...?
It is just a slight whobble. Nothing drastic. I would say it does it 1 out of every 5 times I decelerate. Usually it does it at speeds of around 35 down to 20. It's not bad, just a little noticeable. I haven't exactly pinpointed it in the tranny, I just mainly want to know if anyone has had a similar feeling and what they did to stop it.
Old 10-20-2004, 01:51 PM
  #4  
Moderator
iTrader: (11)
 
jimmyblue's Avatar
 
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,605
Likes: 0
Received 6 Likes on 6 Posts

Default

If you are getting misfires on decel it may be locking
and unlocking the converter. I don't lock my converter
in 2nd or 3rd. Lots of mods there, I wouldn't rule out
some pop-pop-pop kicking the TCC out of lock. A bit
of logging would show this up if it's going on.



Quick Reply: Shudder at deceleration



All times are GMT -5. The time now is 12:14 AM.