00SS9000

I had my SS dynoed today for the first time at speedworks. With open exhaust (cutout), intake, and a lid, i put down 320.9HP and 323.9Torque, through an A4. I went in hoping for 310ish, so when the 320hp showed up i was so suprised and . Let me know what you all think, thanks for your input.

Crowley

I don't think that is too out of hand. How many miles on the odometer? I know you are an A4 and I had an M6, but through full exhaust, totally stock, I put down 306rwhp 323rwtq .. with just a lid it was 316rwhp 338rwtq ... So with a cut out, that sounds about right for an A4 ..

Crowley

Uno99

iTrader: (2)

Yep sound Right

Killer_Bluebird

iTrader: (23)

Those number sound great! a bit on the high side for an A4. Did you pull the car with the cutout close? I wonder if the loss of backpressure from the cutout affect your torque. But then again it may just be the fact that you have 2.73 gears.

Worm

iTrader: (2)

Sounds like you're right where you should be. Seen better, Seen worse Congrats

ss rally red

iTrader: (8)

Stock 02 SS M6, Loudmouth. 326/336 7K. 4.10's. Right in the ballpark.

00SS9000

Thanks guys, i do have 2.73 gears, its got 50k miles on it. I didnt try it with the cutout closed as that requires me to jack up the car. And ss rally red, is your loudmouth as loud as a stock LS1 with a cutout?My car is louder now than my magnaflow was before, but i still want more......cam.....

Sunset01

What was SAE and unadjusted ?

ss rally red

iTrader: (8)

The LM was a longggg time ago, my dyno at the time was as stated, my current setup is in sig still waiting for funds for larger injectors to see what it does with the spray

CNB

iTrader: (4)

Do you mean a LS-6 intake when you say intake?

koolrayz

iTrader: (26)

When my car was new auto 2.73, lid,catback,predator tune 320rwhp 338tq corrected dynojet. so your right there