Need to make 400hp cam only! suggestions ASAP!!!!
#1
12 Second Club
Thread Starter
iTrader: (29)
Join Date: Dec 2003
Location: San Antonio, TX
Posts: 983
Likes: 0
Received 0 Likes
on
0 Posts
Need to make 400hp cam only! suggestions ASAP!!!!
I need to make +400 rwhp and would like atleast 380 rwtq cam only. What cam would everybody recommend? This is a daily driver so it has to be tolerable but keep in mind that im driving w/ this loud *** car w/o radio, interior, sound deadening, and insulation so i can tolerate most. Need info ASAP!!!!
These are my current specs:
2001 block
1998 heads
ls1 intake
home port tb
home port Mass Air Sensor
Stainless Works Longtubes
3" true duals, x-pipe, bullet mufflers, turn downs
160* thermostat
new intake (remember this is a 68 camaro)
March underdrive pulley (not installed yet)
Rear end is a 12 bolt w/ 4.10s
Thanks
Kyle
These are my current specs:
2001 block
1998 heads
ls1 intake
home port tb
home port Mass Air Sensor
Stainless Works Longtubes
3" true duals, x-pipe, bullet mufflers, turn downs
160* thermostat
new intake (remember this is a 68 camaro)
March underdrive pulley (not installed yet)
Rear end is a 12 bolt w/ 4.10s
Thanks
Kyle
Last edited by HotRod68Camaro; 11-22-2004 at 10:03 PM.
#2
SN95 Director
iTrader: (16)
if your only putting down 332rwhp with the mods listed sans TB and pulley your gonna need a hefty sized cam to hit 400rwhp. especially through a 12 bolt and 4.10's.
i recommend you read this forum and see what kind of numbers guys are putting down wiith there various setups.
i recommend you read this forum and see what kind of numbers guys are putting down wiith there various setups.
#6
TECH Enthusiast
iTrader: (8)
Join Date: Oct 2004
Location: Half hour north of ATL
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
I dynoed with 419/395 last tuesday with cam and mods bellow. I love it. It drives nearly just as smooth as the stock cam with the exception of first gear in parking lots it can be a lil jerky. In 6th i can run 1000 rpm and it is not jerky at all. Call Brian Tooley at Total Engine Airflow and tell him you want the same cam as D.j. He will know what one your talking about
#7
LSxGuy widda 9sec Mustang
iTrader: (12)
Join Date: Nov 2001
Location: Texas and Qatar
Posts: 3,043
Likes: 0
Received 0 Likes
on
0 Posts
We have holiday specials running on several camshafts. Checkout the Torquer & 231.237 camshafts, they've both gone over 400rwhp & are on special for $310!!
https://ls1tech.com/forums/sponsor-sales-specials/242609-crazy-holiday-camshaft-specials-310-texas-speed-performance.html
https://ls1tech.com/forums/sponsor-sales-specials/242609-crazy-holiday-camshaft-specials-310-texas-speed-performance.html
Trending Topics
#9
On The Tree
iTrader: (2)
Join Date: Oct 2003
Location: Arizona
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Check into the LG Motorsports G5X3! We have several guys putting down 400 rwhp and we have the worst state for tunning and dynoing because of how hot it is and our shitty gas.
Thats what im getting in the next month or so.
Thats what im getting in the next month or so.