SLP head & cam packge??
#7
TECH Addict
Originally Posted by Slowhawk
I dyno'd one of there 420hp packages that they installed.It put down a whopping 355rwhp/350tq
Trending Topics
#9
TECH Apprentice
iTrader: (1)
Join Date: Aug 2004
Location: Miramar, FL
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ty_ty13
not defending SLP but they are talkin horsies in the motor....not at the tires... just my $.02
I'm pretty happy with 411-419(depending on where I dyno) through cats and gears. I just wish the damn car wasn't so heavy.
#10
LS1TECH Sponsor
iTrader: (6)
Join Date: Nov 2001
Location: Reading, PA
Posts: 2,102
Likes: 0
Received 0 Likes
on
0 Posts
Do yourself a huge favor and do some research on here. Many of the sponsors (including us) offer much better packages producing more power.
Give me a call if I can help you.
Mikey
Give me a call if I can help you.
Mikey
#11
TECH Addict
Originally Posted by mikey
Do yourself a huge favor and do some research on here. Many of the sponsors (including us) offer much better packages producing more power.
Give me a call if I can help you.
Mikey
Give me a call if I can help you.
Mikey
#12
TECH Addict
iTrader: (1)
Originally Posted by gtodoug
I did their package. Best pull through stock gears was 421-427whp with the mods listed in my sig. I put the gears in and now I'm at 411whp. Not bad, but lack of tq kinda sucks.
#14
TECH Addict
iTrader: (1)
Originally Posted by Slowhawk
I forgot to mention it cost him $6500 too
#15
TECH Apprentice
iTrader: (1)
Join Date: Aug 2004
Location: Miramar, FL
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Grinder11 for the post.
I don't think slowhawk was referring to me about it costing $6500 bucks. However, the last pass I made at the track is in the sig. The conditions in the run were pretty typical for florida. 69*-73* temps with humidity in the 85-90% range. The raceweight on my goat is 3910. I'm a solid 200, with the vehicle weighing in at 3710 after removing the spare tire and assoc. equipment.
There was alot of KR on that run as well as the car was running very lean in the 13.6-13.9 range throughout the rpm range. the car was also running JBA shorty headers as well on this run.
I've since gotten the car tuned properly, installed longtubes, and put in 3.91 gears. After putting the gears in the drivetrain didn't like it at all twisting a half shaft and twisting the driveshaft as well causing it to bind. I've got all the new drivetrain equipment in from BMR except for the halfshafts. The car has sat for 2-3 weeks now but they should be in sometime next week. I'm excited to try and make it back out to the track and see how she does. I'll keep you guys in formed.
I don't think slowhawk was referring to me about it costing $6500 bucks. However, the last pass I made at the track is in the sig. The conditions in the run were pretty typical for florida. 69*-73* temps with humidity in the 85-90% range. The raceweight on my goat is 3910. I'm a solid 200, with the vehicle weighing in at 3710 after removing the spare tire and assoc. equipment.
There was alot of KR on that run as well as the car was running very lean in the 13.6-13.9 range throughout the rpm range. the car was also running JBA shorty headers as well on this run.
I've since gotten the car tuned properly, installed longtubes, and put in 3.91 gears. After putting the gears in the drivetrain didn't like it at all twisting a half shaft and twisting the driveshaft as well causing it to bind. I've got all the new drivetrain equipment in from BMR except for the halfshafts. The car has sat for 2-3 weeks now but they should be in sometime next week. I'm excited to try and make it back out to the track and see how she does. I'll keep you guys in formed.
#18
TECH Addict
iTrader: (1)
Originally Posted by gtodoug
Thanks Grinder11 for the post.
I don't think slowhawk was referring to me about it costing $6500 bucks. However, the last pass I made at the track is in the sig. The conditions in the run were pretty typical for florida. 69*-73* temps with humidity in the 85-90% range. The raceweight on my goat is 3910. I'm a solid 200, with the vehicle weighing in at 3710 after removing the spare tire and assoc. equipment.
There was alot of KR on that run as well as the car was running very lean in the 13.6-13.9 range throughout the rpm range. the car was also running JBA shorty headers as well on this run.
I've since gotten the car tuned properly, installed longtubes, and put in 3.91 gears. After putting the gears in the drivetrain didn't like it at all twisting a half shaft and twisting the driveshaft as well causing it to bind. I've got all the new drivetrain equipment in from BMR except for the halfshafts. The car has sat for 2-3 weeks now but they should be in sometime next week. I'm excited to try and make it back out to the track and see how she does. I'll keep you guys in formed.
I don't think slowhawk was referring to me about it costing $6500 bucks. However, the last pass I made at the track is in the sig. The conditions in the run were pretty typical for florida. 69*-73* temps with humidity in the 85-90% range. The raceweight on my goat is 3910. I'm a solid 200, with the vehicle weighing in at 3710 after removing the spare tire and assoc. equipment.
There was alot of KR on that run as well as the car was running very lean in the 13.6-13.9 range throughout the rpm range. the car was also running JBA shorty headers as well on this run.
I've since gotten the car tuned properly, installed longtubes, and put in 3.91 gears. After putting the gears in the drivetrain didn't like it at all twisting a half shaft and twisting the driveshaft as well causing it to bind. I've got all the new drivetrain equipment in from BMR except for the halfshafts. The car has sat for 2-3 weeks now but they should be in sometime next week. I'm excited to try and make it back out to the track and see how she does. I'll keep you guys in formed.
#19
TECH Apprentice
iTrader: (1)
Join Date: Aug 2004
Location: Miramar, FL
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
LOL, I hear ya. The raceweight on BMR's A4 with nitrous bottles/rollcage/SFC's,etc is 4120. They are running 10.20's @130mph on a 300shot and an ironblock 408. It is a pleasure to drive on the street. It's pretty quiet in the cabin and very comfortable.
I feel the car will trap 115-117mph now. I'm excited to make some winter passes. As soon as I get some new results I'll post em. The times are definately not indicative of how the car is currently running.
I feel the car will trap 115-117mph now. I'm excited to make some winter passes. As soon as I get some new results I'll post em. The times are definately not indicative of how the car is currently running.