need some advice(fast)
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Jul 2004
Location: Palm Harbor, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
need some advice(fast)
basically i'm sick of trying to fish this damn bolt out of my oil pan. i have no idea where it is, the big magnet isnt working, and the little pen magnet is frustrating me, so i'm just gonna pull the pan.
1.) how do i get the motor mount bolt out? i took the nut off but the bolt wont budge.
2.) to lower the k member i just unscrew the 6 bolts and slide it down?
3.) will i have enough room to take the pan out?
4.) if there is an easier way to do anything let me know please!
1.) how do i get the motor mount bolt out? i took the nut off but the bolt wont budge.
2.) to lower the k member i just unscrew the 6 bolts and slide it down?
3.) will i have enough room to take the pan out?
4.) if there is an easier way to do anything let me know please!
#2
Click here https://ls1tech.com/forums/showthrea...olt+in+oil+pan
for some ideas (I would try going through the oil sensor hole)
for some ideas (I would try going through the oil sensor hole)