UGotBeaT

I found some Chrome C6 wheels 18x8.5 and 19x10 from house of wheels and tko performance... http://forums.corvetteforum.com/showthread.php?t=974517 ...and I am lowered with eibach sportlines and was wondering if these would rub alot wiht the 19's and was wondering what would work to make it fit. I think the offset is 56 for the front and 65mm for the rear.

Dont I need spacers and to roll the rear fender or somethin..how do you do that???

Anyone have pics of a t/a with c6's ive seen the camaros already.

LS1_PNYTAMR

iTrader: (1)

hmm im intrested in those wheels as well, good thread to see if they'll fit or not..

i am not lowered, and wonder if those would work the way they come or what would be needed to make fit, and if u dont mind i was also wondering about 17x9.5 and 17x 11 z06 rims.

Xsta Z 28

iTrader: (2)

Bad offsets. 56mm will work, but will look tucked in. 65mm will rub the inner wheel well very bad and need spacers and longer wheel studs.

UGotBeaT

well I have a pro fab tubular k member and it seemed to tuck in my front wheels a little bit. So All I need for the rear wheels are spacers and longer wheels studs? Where can I get those and will they not rub since the car is lowered with sportlines?

UGotBeaT

ttt...

UGotBeaT

anyone....where do I get spacers and longer wheel studs and how big of spacers do I need and with the spacers and studs will the rear rub with sportlines?

Blue LS1

iTrader: (1)

Im in the same situation and im trying to get a look at the WS6 with C6 rims on it. I had two photoshoped pics.... here is one of them... ill have to look for the second one.

Slammed-am

I like them better than the c5 y2k wheels,

yet I still don't like them for some reason....

?

Cummins

iTrader: (2)

here is another photoshop with C6 wheels:

Turo

iTrader: (23)

i normally tend to like rims that have a lip, but DAMN those wheels are sexy

UGotBeaT

yeh they look good on that first pic. Anybody know about the fitment issues for 18s and 19s.