Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Cartek 3X H&C

Thread Tools
 
Search this Thread
 
Old 02-28-2005, 03:29 PM
  #1  
10 Second Club
Thread Starter
iTrader: (27)
 
sickss228's Avatar
 
Join Date: Nov 2004
Location: Central NJ
Posts: 647
Likes: 0
Received 0 Likes on 0 Posts

Default Cartek 3X H&C

Anyone running this package or know anyone that does? I want to upgrade but want to hear from some guys on here that have the heads and cam or just the cam. Is it streetable, what kind of power is it making what are your times in the quarter? Thanks
Old 02-28-2005, 03:44 PM
  #2  
10 Second Club
iTrader: (16)
 
LS1LT1's Avatar
 
Join Date: Nov 2001
Posts: 9,331
Received 0 Likes on 0 Posts

Default

There are a few people on the board that run the 3X package, Pete(BSPZ28), Alex(WS6TransAm01) are two i can think of off the top of my head. Petes car was featured in GMHP magazine back in July of 04 and has run a best of 10.69 at 3200 lbs. Also if you want you can check out the corvette forum there is a bunch of guys over there too.
Old 02-28-2005, 03:58 PM
  #3  
Launching!
 
gaga's Avatar
 
Join Date: Dec 2003
Location: White Plains,NY
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts

Default

i rode in pete's car.... its a monster.... made me realize how pathetic my bolt on SS really is!
Old 02-28-2005, 10:16 PM
  #4  
Moderator
iTrader: (10)
 
John B's Avatar
 
Join Date: Nov 2001
Location: Phoenix, AZ
Posts: 3,248
Received 13 Likes on 6 Posts

Default

I have the 3X cam.....very streetable. It does lose a little torque down low but more than makes up for this in the upper RPM bands. I certainly have no issues incinerating my 315/35x17's at 45 MPH in 2nd by just stabbing the throttle :>)
Old 03-01-2005, 05:29 AM
  #5  
LS1Tech Sponsor
iTrader: (12)
 
Slowhawk's Avatar
 
Join Date: Nov 2001
Location: Bridgewater,Ma
Posts: 14,865
Likes: 0
Received 6 Likes on 6 Posts

Default

A good friend of mine runs it.Car goes 10.8 at 122mph in an A4 at 3650lbs.Car dyno's 440rwhp.The package does givee up alot of midrange torque though.




All times are GMT -5. The time now is 11:28 PM.