1STGEN68-2000SS

Anyone have any pics of the dash after you installed the 10pt wolfe cage with the bar behind the dash. I would like to see what it looks like finished.
Thanks
Alan

DopeFedZ

iTrader: (34)

PRAY HRD

iTrader: (119)

nice setup there dope. very clean and i finally got to see a 4th gen f-body without a console in it. that made up my mind that it looks as good as it does in a 60's-70's car. i'm definately ditching mine.

later,
Dave

1STGEN68-2000SS

Thank's for the pics. I just finished removing the entire interior and dash. Time to do some welding and install it all back in. I just noticed your steering wheel, since I deleted the passenger side air bag I would like to do the same thing. What model is that and wher can I get one.
Thank's
Alan

DopeFedZ

iTrader: (34)

You don't want this old steering wheel It's actually one of those $40 ones you get at Oreilly's. The hub needed is off of a full size chevy truck if I remember correctly.

1STGEN68-2000SS

Well it looked good in the picture.
What part of Houston are you in.

chpmnsws6

iTrader: (70)

any way you can figure out what year model etc that the truck was?

Humanoid

iTrader: (3)

Dope,
I never imagined your car was so well put together. I guess the pic of the mismatched fenders threw me off. It is good to see you have your prioritys straight. Sweet ride.

FastBlackTA

iTrader: (7)

that looks nice....i might just do one of those myself

PRAY HRD

iTrader: (119)

hey Dope.........are those seats mounted directly to the floor or are they on brackets?
pm me if you'd prefer.

later,
Dave

chpmnsws6

iTrader: (70)

thats what happens when you hit a wall

DopeFedZ

iTrader: (34)

I honestly can't remember the model number for the Grant hub you need. I know it was off a late model full size Chevy truck. I think its the early 90's one and I didn't have any probs. Just picked up the steering wheel and the hub at the local Oreilly's. The fenders are mismatched because I bought the car used and the bumper and fenders when pretty beat up and flimsy so I bought some local used ones. The hood is a Glasstek product and it comes gelcoated black thats why everything is black on the front end. No wrecks here though and I hope it will stay that way.

DopeFedZ

iTrader: (34)

Thanks for the compliment. Just because the car won't see any street duty and I guess would be considered a race car doesn't mean it should not look good. Still trying to decide on a color for the car or maybe some sort of paint scheme but the mismatched colors will be going away pretty soon.

Dave-The driver seat is on a bracket my buddy made but the passenger is bolted directly to the floor board. No one really gets in anyways so it just there for looks

DopeFedZ

iTrader: (34)

Here are a couple pics of the engine bay. All holes and seams were filled in for a smooth looking bay.

LS1_PNYTAMR

iTrader: (1)

stupid question, so the 8 point is the same thing but without the bar coming up and over the lower door bar.. as in no dash bar, and that bar i will hit my head on getting out wont be there either right?

FenixSS

iTrader: (3)

Does wolfe have a webpage? I couldn't find their name in the sponsor list

John_D.

iTrader: (2)

Their full name is wolfe racecraft, that should help...

A3Z28

there's a link to wolfe's site on WWW.SIMPLEQUICKRACING.COM

Parker TX

iTrader: (16)

www.wolferacecraft.com

FenixSS

iTrader: (3)

Thanks