gear and tire size??
#1
TECH Fanatic
Thread Starter
iTrader: (-1)
Join Date: Nov 2002
Location: Southeast Texas
Posts: 1,178
Likes: 0
Received 0 Likes
on
0 Posts
gear and tire size??
i am going to have about 500 hp and was wondering what the best combo was as far as tire height and gear, ill be spinning it to about 7k and have a turbo 350 with the regular gearing, should i go with 4.11's and a 29" tire or 4.30 with a 28" tire?? just wanted to know what yall found out through experiance and what yall had to go through for the best et...
not worried about gas mileage, mostly car about et and if it can get me to my work which it less than a mile away!! thanks again, dwayne
not worried about gas mileage, mostly car about et and if it can get me to my work which it less than a mile away!! thanks again, dwayne
#2
LS1Tech Sponsor
iTrader: (22)
Join Date: Mar 2005
Location: 32639 Groesbeck HWY. Fraser MI 48026
Posts: 1,593
Likes: 0
Received 0 Likes
on
0 Posts
Rule of thumb in my area has been a 4.10 for a 28" tall and a 4.30 for a 29" or 30" tall tire. If you are using NOS then drop it down to the next ratio.
I ran a 4.30 and a 29" tall goodyear last year on 225 shot, and this year a 4.10 on the same tire with a 2 stage NOS system and hoping for 8's this summer.
I ran a 4.30 and a 29" tall goodyear last year on 225 shot, and this year a 4.10 on the same tire with a 2 stage NOS system and hoping for 8's this summer.