Question about 4.10 gears
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Question about 4.10 gears
I currently have 3.42's and was wondering if i put 4.10's in my M6 would i need to change from 4th to 5th in the 1/4mile or will i be able to leave it in 4th. I have the stock 16 rims on it.
#2
11 Second Club
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
you would prolly run out of gear in the 1/4 mile, running on rev limiter if you dont shift into 5th with 4.10's, but who cares, DO IT, I am getting a set ehre soon also, and i here they are a crazy difference
Trending Topics
#10
TECH Regular
Join Date: Jan 2003
Location: Alabamastan
Posts: 451
Likes: 0
Received 0 Likes
on
0 Posts
Even if the gears make you shift in the 1/4 track...they are more than worth it just everyday driving the car on the street. I.E. me getting on the interstate 0-100 = ear to ear grin.
#11
TECH Resident
iTrader: (3)
yeah i will say that the 1,2,3 runwith 4.10's is something everyone should experience once.
but jeez when you can start from 3rd.... it almost seems to much gear to keep this top end loving motor in its sweetspot longer. i cant help but having this feeling everytime i run my car that it was over so fast that my motor didnt even get a chance to get going through each gear.
(if that makes any sense)
im also on a stock toasted/slippng clutch so this could also be the reason.
and practice shifting because your going to be doing a whole lot of it!!
but jeez when you can start from 3rd.... it almost seems to much gear to keep this top end loving motor in its sweetspot longer. i cant help but having this feeling everytime i run my car that it was over so fast that my motor didnt even get a chance to get going through each gear.
(if that makes any sense)
im also on a stock toasted/slippng clutch so this could also be the reason.
and practice shifting because your going to be doing a whole lot of it!!