Wnts2Go10O

iTrader: (12)

anyone try this yet? i mean why cant we have that table top power curve or at least close to it. ive been thinkin of haveing a cam like this ground for my gen 1 383. thoughts?

terr1bleone

iTrader: (1)

i know it works, but why give up the manly feeling a gen 1 engine gives out, the low down torque is what gets me.

MADMAN

iTrader: (4)

I have that firing order in my SBC. The motor made killer torque 595@ 5500 and still made hp at 8200. It also took all the reversion out of the intake plus the car idles at 800rpm no problem.

Wnts2Go10O

iTrader: (12)

terr1- any sbc that pumps out 400ft/lbs+ is manly but besides that its for better efficiency.
madman, whered u get the cam, specs, etc. you can pm me bout it if u want.
PS- this is for a street motor

terr1bleone

iTrader: (1)

i know this, i have some pretty powerfulle sbc/bbc/ls1s, its just that at the 400-500 hp range, you cant beat the sbc/bbc feel. ls1s just dont have it, but they rev much higher and make power up there. also like madman said your going to need to do a few other modifications.

Ls1LikeNoOther

i got a 383 that makes close to 500 hp to the wheels...

Wnts2Go10O

iTrader: (12)

he said nothing about other mods.. besides the only thing id have to do besides move all the wires is move injector plugs. im sure my motor would have a very unique sound too... im all for being different..lol.

MADMAN

iTrader: (4)

All you have to change is the firing order of the sparkplugs and the injector sequence.

Wnts2Go10O

iTrader: (12)

i figured as much. think an Xtreme energy hyd roller grind with that firing order would be good?