Install $375+ !?!?!
#1
Teching In
Thread Starter
Join Date: Jul 2005
Location: Fort Worth ,Texas
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Install $375+ !?!?!
I went to a local speed shop, and this is what i was quoted. I consider myself pretty mechanically inclined, would I be able to install one myself, or is it very technical?
#5
10 Second Club
iTrader: (9)
Join Date: Jan 2004
Location: Laconia, NH
Posts: 3,878
Likes: 0
Received 0 Likes
on
0 Posts
If you have common mechanical sense and basic electrical knowledge, you can install everything yourself no problem.
I don't think that $375 is real outragous if it's a super clean install.
I don't think that $375 is real outragous if it's a super clean install.
#7
TECH Enthusiast
iTrader: (8)
Join Date: Dec 2001
Location: SE Florida
Posts: 543
Likes: 0
Received 0 Likes
on
0 Posts
The hardest part is the wiring. And there is a tons of info on here and people who can answer any questions you might have concering that portion. No way in hell I would pay that type of money to have nitrous installed. Just take your time and you should have no problem doing it yourself.
Trending Topics
#8
Originally Posted by Gregg 00SS
The hardest part is the wiring.
#10
TECH Enthusiast
Join Date: Jul 2002
Location: Dallas, TX
Posts: 658
Likes: 0
Received 0 Likes
on
0 Posts
I could probably do the basic kit, but with switches in my ashtray, bottle heater, remote openers, FPSS, Electric Gauges, etc etc etc
I am not going to mess with it. For all the stuff I have $500 or more would be about average since it would likley take a good 6-8 hours.
Who knwos I might attempt it, but with all the stuff that could go wrong. I aint gonna do it. Again if it was just the $500 kit, then it is n't too hard, but again I would want to get it tuned and dyned to check for everything.
I want a nice clean install.
Here is what I have:
I have NX Wet Kit dual nozzle
FPSS
NX Bttl Opener
NX Heater
BMN Window Switch
NX switch panel for ashtray
NX Electric N2O Gauge for ashtray
Bottle Gauge
NX Filter
Nitro Daves Big Purge Kit
I am not going to mess with it. For all the stuff I have $500 or more would be about average since it would likley take a good 6-8 hours.
Who knwos I might attempt it, but with all the stuff that could go wrong. I aint gonna do it. Again if it was just the $500 kit, then it is n't too hard, but again I would want to get it tuned and dyned to check for everything.
I want a nice clean install.
Here is what I have:
I have NX Wet Kit dual nozzle
FPSS
NX Bttl Opener
NX Heater
BMN Window Switch
NX switch panel for ashtray
NX Electric N2O Gauge for ashtray
Bottle Gauge
NX Filter
Nitro Daves Big Purge Kit
#11
TECH Senior Member
iTrader: (2)
Originally Posted by 2001 Red Coupe Bandit
I could probably do the basic kit, but with switches in my ashtray, bottle heater, remote openers, FPSS, Electric Gauges, etc etc etc
I am not going to mess with it. For all the stuff I have $500 or more would be about average since it would likley take a good 6-8 hours.
Who knwos I might attempt it, but with all the stuff that could go wrong. I aint gonna do it. Again if it was just the $500 kit, then it is n't too hard, but again I would want to get it tuned and dyned to check for everything.
I want a nice clean install.
Here is what I have:
I have NX Wet Kit dual nozzle
FPSS
NX Bttl Opener
NX Heater
BMN Window Switch
NX switch panel for ashtray
NX Electric N2O Gauge for ashtray
Bottle Gauge
NX Filter
Nitro Daves Big Purge Kit
I am not going to mess with it. For all the stuff I have $500 or more would be about average since it would likley take a good 6-8 hours.
Who knwos I might attempt it, but with all the stuff that could go wrong. I aint gonna do it. Again if it was just the $500 kit, then it is n't too hard, but again I would want to get it tuned and dyned to check for everything.
I want a nice clean install.
Here is what I have:
I have NX Wet Kit dual nozzle
FPSS
NX Bttl Opener
NX Heater
BMN Window Switch
NX switch panel for ashtray
NX Electric N2O Gauge for ashtray
Bottle Gauge
NX Filter
Nitro Daves Big Purge Kit
Robert
#12
TECH Veteran
iTrader: (33)
Join Date: Nov 2001
Location: Port Richey
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
I agree Robert. If its just a basic kit like a 5177 kit with no accessories it doesnt take too long...maybe 4-5 hours depending on how fancy you get with things like switch placement and bottle mounting. But on an elaborate kit it will usually take me days.
With things like gauges window switches, fpss, and all the other add ons...if your getting it installed for $350 Id say thats a bargain...as long as it was a CLEAN install.
But the cleanest installs are always done by the owners of the cars.
With things like gauges window switches, fpss, and all the other add ons...if your getting it installed for $350 Id say thats a bargain...as long as it was a CLEAN install.
But the cleanest installs are always done by the owners of the cars.
#13
Teching In
Thread Starter
Join Date: Jul 2005
Location: Fort Worth ,Texas
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
The install is $375, the accesories purge, gauges, other add ons $75 a piece thats when I first contemplated doin it myself. Reminds me of that new movie 40 yr old virgin "We have a whole aisle of do it yourself."" DO you like to do it yourself?"