NassyVette

iTrader: (22)

Just curious if this cam SI5 231 237 .589 .595 112, will work ok with stock heads until I get a set of AFR 205's? Anything I need to worry about? Any input is appreciated, TIA.

-Adam

NassyVette

iTrader: (22)

Anyone...? TTT

Wnts2Go10O

iTrader: (12)

i doubt u hve anything to worry about. there are guys runnin a smidge more lift and not havein issues. couldnt hurt to check clearance jus to make sure.

NassyVette

iTrader: (22)

Thats what I was thinking...lift isn't as wild as some of the other cams people run. What about power with this combo...will I make 430+?

SgtB

iTrader: (3)

you'll be fine with stock heads...
with the AFR's and a really good tune I could see 430 in your future

Flawless02SS

iTrader: (9)

Yeah cam should clear with no problem, with heads you could see 430hp. Cam only prolly 390-400

blkZ28spt

That cam will easily fit stock heads. Why that and not the newer one, what is it, 233/239 R2? Even the MS3 fits.

Next time you have a "will it fit stock heads" question, consult the search button first as it contains a wealth of information.

fotoboy

iTrader: (1)

have same cam intalling over winter with PP ls6 style heads have seen this combo make 430 rwhp, I would like to see hp//tq curves and rpm on this cam though.

SouthFL.02.SS

My ol' setup (on an awful tune): TSP231/237 (Lazy Lunati grind- I'm not sure what lobe profile the Speed Inc version has) + TEA 1.5 5.3's. This same setup is now making 480rwhp. (Baseline shows ls6 intake + SLP LT's- higher line shows FAST90/90 + QTP HVMC LT's on the same heads/cam).