TR224 and Comp Cams 1.85 compatability
08-28-2005, 09:33 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2004
Location: Marietta GA
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
TR224 and Comp Cams 1.85 compatability Hey guys.
I have a TR224 on a 112 and 862 code heads that have been CNC'd and hand polished. The heads have not been milled and are fitted with Manley 2.02 and 1.60's and will soon have their 941's swapped out for 918's with Ti retainers.
I was wondering if anyone has experience with this cam / rocker (Comp 1.85's) combo??
Thanks
Mike
I have a TR224 on a 112 and 862 code heads that have been CNC'd and hand polished. The heads have not been milled and are fitted with Manley 2.02 and 1.60's and will soon have their 941's swapped out for 918's with Ti retainers.
I was wondering if anyone has experience with this cam / rocker (Comp 1.85's) combo??
Thanks
Mike
08-29-2005, 04:39 AM
#2
On The Tree
iTrader: (2)
Join Date: Mar 2005
Location: FORT WALTON BEACH
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
dont do it!!!! the ramp rates are to fast and your Piston to valve clerance will be too close!!!! I did the 1.75 and my lift came out to .579. With 1.85 it will be around .612 too much with out fly cutting.
