ssmaro

I ended up buying a 01 SS about 2 weeks ago. Well anyway I took it out the other day to have a little fun with it and I was going around courners trying to spin the rear end sideways and only one wheel will spin. How come it's not putting power to both wheels? But I will say when I am going strait it will leave a nice set of posi's. Any help is appreciated. Thanks

Joel

SLP4CamaroSS

iTrader: (16)

i dont konw if this has to do with anything but do u got traction control

Viper

iTrader: (6)

Your posi is shot. It's called the one wheel inside peel.

For a 10-bolt, you can get a T2 or a T2R ( better, more expensive ). I have the T2R and it REALLY lays down the rubber.

trackbird

iTrader: (4)

He has a T2 (stock in a 2001). When you are in a hard corner, it unloads the inside tire and a torsen will allow that wheel to sping. That's just the way of things with a stock torsen diff.

Viper

iTrader: (6)

Sorry, thanks Kevin. Well, a T2R will allow ssmaro to reach his goals!

http://www.torsen.com/products/T-2R.htm

www.stranoparts.com

ssmaro

Thanks guys. And yeah I have traction control on the car. Also I don't think the posi is shot because its only got 28k miles and it was driven with care.

jerflash

you just have to give the posi more power and get it to spin before the corner hahaha

mine dud the same thing before the 12 bolt

pop the clutch it WILL swing out

Michael55123

iTrader: (3)

Indeed it will. It just takes a little bit of clutch, if any to get it to come around. I've never had a problem "getting it side ways" though sometimes it creates a problem.

Sharpe

iTrader: (7)

I guaran-*******-tee that's a true statement.