State69champ

iTrader: (5)

I dont have a cat, so will i need the install kit or could it be made for cheaper?

DarkHorse

iTrader: (1)

You need the install kit - cat or not. It's just a small S bend pipe

State69champ

iTrader: (5)

so.. its gonna have to be weilded?? Thats what i wanted to avoid to save money..
I could install myself.

RedRocketZ28

iTrader: (19)

I have heard from others that an exhaust shop can make the pipe for you for a lot cheaper than the $80 install kit.

Muncie4sp

iTrader: (2)

local shops average 7-10 bucks a weld

BizZzatch350

iTrader: (33)

I had mine put in and they didnt use the S pipe conversion kit

DarkHorse

iTrader: (1)

Mine came with clamps - but I welded it. Exhaust shop could do it but most don't have a mandrel pipe bender so you will have 'some' restricted flow with the kinks, but, I highly doubt that you would notice it.

Cerwin Vega Fan

Just see if you can get it done local and yes you can clamp it if you want too. But IMO it is best to go with welds since you have a reduced chance of leaks. You could also buy your own mig machine, you would be surprised how many uses you can find for it.

Rhoop24

I didn't buy the install kit for my l/m and i'm single cat.

State69champ

iTrader: (5)

We will see how it goes..I sent the money to the guy now i just hope he ships it to me..