McLeod bellhousing problems
02-05-2006, 08:05 PM
#3
TECH Fanatic
iTrader: (1)
Join Date: Jun 2003
Location: Mount Dora, Fla
Posts: 1,876
Likes: 0
Received 0 Likes
on
0 Posts
My buddy installed his a couple of months ago and is running 12.00 @ 120 with no traction but no problems. Mine is in, no problems, just waiting for my friend to finish my tranny rebuild. The oil pan casting ridges must be ground down for the front plate of the bell housing to fit. Also I went with 3/8 x 1 1/2" bolts since my tranny has been in and out so many times and the threads are getting fkd up. I used hex head bolts for the top three bolts and Allen heads for the rest. My friend put in a SPEC 4 and I'm going with the SPEC 5.
