chpmnsws6

iTrader: (70)

at what ohm does the SES pop up at?

i thought if it got past 4.98 it was triggered. am i wrong? i'm about to do a this much needed mod

oange ss

iTrader: (50)

it's volts, 4.65

KilerTA

iTrader: (70)

You want to look at this https://ls1tech.com/forums/generation-iii-external-engine/420817-bumpstop-mod-my-first-try-writing-install.html

camaroextra

iTrader: (10)

i thought it was 4.7, i remember grinding mine pretty close to 4.65

chrs1313

iTrader: (24)

4.7 or > triggers the SES

TheBlurLS1

iTrader: (8)

Most people like to stop at around 4.65.

Make sure your TB blade tab is hitting the stop head on, i grinded mine at a bit of an angle, so now it only hits in one little spot, if it bends a little bit, mine's going to throw the SES code.

Installuniversity.com has a nice writeup about it. Click LSx vehicals, then follow your nose.