f.s my rides
05-10-2006, 12:42 AM
#1
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Dec 2002
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
f.s my rides decided to do something else . so my cars are up for sale. all of them.
1972 camaro ss- 13.8.1 comp solid roller cam 406, callies crank, lunati h-beam 5.7 rods,wiseco 13.1 pop up pistons gas ported. and rings gapped .25 for a 350 hp fogger, the heads are fully ported dart 2s. they flowed 320 cfm @ .550 lift. the cam is a lunati solid roller 267/272@.050 630/640 lift @.050
valvetrain consists of jese shaft mount rockers 1.7 ratio. motor has been balanced and blueprinted. 9$k invested in just the motor. the transmission is a 1997 t56 with about 3k miles on it. the clutch is a spec stage 4 solid disc.
interior has completey been refurbished with carpet , new corbeau seats and autometer /covan gauge cluster.
the wheels and tires consist of 17x12 &17x8 tt2s with bfg kd tires. 315/35/17 &275/40/17
there are more mods to this car than i can list . just pm me for details on it.
asking $22k firm
next car is my 1993 z28 ls1 camaro
the motor is a 2004 ls1 out of a c5. 241 heads mti z1 cam and pace setter long tube headers it has about 2000 miles on the motor car is setup for a m6. at the moment the trans is out for a clutch upgrade. car has 80k miles on it.
asking $13k firm for it
next vehicle is my 2004 colorado. -this one is the ls model pretty basic work truck, roll up windows manual locks , and bucket seats. cd player 5% tinted windows otherwise just clean and not modified in any way. 28.600 miles
asking 14.500$
pm me if theres any interest!
1972 camaro ss- 13.8.1 comp solid roller cam 406, callies crank, lunati h-beam 5.7 rods,wiseco 13.1 pop up pistons gas ported. and rings gapped .25 for a 350 hp fogger, the heads are fully ported dart 2s. they flowed 320 cfm @ .550 lift. the cam is a lunati solid roller 267/272@.050 630/640 lift @.050
valvetrain consists of jese shaft mount rockers 1.7 ratio. motor has been balanced and blueprinted. 9$k invested in just the motor. the transmission is a 1997 t56 with about 3k miles on it. the clutch is a spec stage 4 solid disc.
interior has completey been refurbished with carpet , new corbeau seats and autometer /covan gauge cluster.
the wheels and tires consist of 17x12 &17x8 tt2s with bfg kd tires. 315/35/17 &275/40/17
there are more mods to this car than i can list . just pm me for details on it.
asking $22k firm
next car is my 1993 z28 ls1 camaro
the motor is a 2004 ls1 out of a c5. 241 heads mti z1 cam and pace setter long tube headers it has about 2000 miles on the motor car is setup for a m6. at the moment the trans is out for a clutch upgrade. car has 80k miles on it.
asking $13k firm for it
next vehicle is my 2004 colorado. -this one is the ls model pretty basic work truck, roll up windows manual locks , and bucket seats. cd player 5% tinted windows otherwise just clean and not modified in any way. 28.600 miles
asking 14.500$
pm me if theres any interest!
Last edited by ex-SS-ve; 05-10-2006 at 12:56 AM.
05-10-2006, 01:01 AM
#2
10 Second Club
iTrader: (3)
Join Date: Nov 2003
Location: HTOWN
Posts: 544
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ex-SS-ve
decided to do something else . so my cars are up for sale. all of them.
1972 camaro ss- 13.8.1 comp solid roller cam 406, callies crank, lunati h-beam 5.7 rods,wiseco 13.1 pop up pistons gas ported. and rings gapped .25 for a 350 hp fogger, the heads are fully ported dart 2s. they flowed 320 cfm @ .550 lift. the cam is a lunati solid roller 267/272@.050 630/640 lift @.050
valvetrain consists of jese shaft mount rockers 1.7 ratio. motor has been balanced and blueprinted. 9$k invested in just the motor. the transmission is a 1997 t56 with about 3k miles on it. the clutch is a spec stage 4 solid disc.
interior has completey been refurbished with carpet , new corbeau seats and autometer /covan gauge cluster.
the wheels and tires consist of 17x12 &17x8 tt2s with bfg kd tires. 315/35/17 &275/40/17
there are more mods to this car than i can list . just pm me for details on it.
asking $22k firm
next car is my 1993 z28 ls1 camaro
the motor is a 2004 ls1 out of a c5. 241 heads mti z1 cam and pace setter long tube headers it has about 2000 miles on the motor car is setup for a m6. at the moment the trans is out for a clutch upgrade. car has 80k miles on it.
asking $13k firm for it
next vehicle is my 2004 colorado. -this one is the ls model pretty basic work truck, roll up windows manual locks , and bucket seats. cd player 5% tinted windows otherwise just clean and not modified in any way. 28.600 miles
asking 14.500$
pm me if theres any interest!
1972 camaro ss- 13.8.1 comp solid roller cam 406, callies crank, lunati h-beam 5.7 rods,wiseco 13.1 pop up pistons gas ported. and rings gapped .25 for a 350 hp fogger, the heads are fully ported dart 2s. they flowed 320 cfm @ .550 lift. the cam is a lunati solid roller 267/272@.050 630/640 lift @.050
valvetrain consists of jese shaft mount rockers 1.7 ratio. motor has been balanced and blueprinted. 9$k invested in just the motor. the transmission is a 1997 t56 with about 3k miles on it. the clutch is a spec stage 4 solid disc.
interior has completey been refurbished with carpet , new corbeau seats and autometer /covan gauge cluster.
the wheels and tires consist of 17x12 &17x8 tt2s with bfg kd tires. 315/35/17 &275/40/17
there are more mods to this car than i can list . just pm me for details on it.
asking $22k firm
next car is my 1993 z28 ls1 camaro
the motor is a 2004 ls1 out of a c5. 241 heads mti z1 cam and pace setter long tube headers it has about 2000 miles on the motor car is setup for a m6. at the moment the trans is out for a clutch upgrade. car has 80k miles on it.
asking $13k firm for it
next vehicle is my 2004 colorado. -this one is the ls model pretty basic work truck, roll up windows manual locks , and bucket seats. cd player 5% tinted windows otherwise just clean and not modified in any way. 28.600 miles
asking 14.500$
pm me if theres any interest!
Matt
PS: What next?
Trending Topics
05-10-2006, 12:42 PM
#10
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Dec 2002
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MrBill97396
Damn all you need to do now is have a finance manager and your a dealership. TTT Good Luck, I would love to have that 72 it sounds clean.
05-10-2006, 12:45 PM
#12
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Dec 2002
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Toxic Texan
Joe, what the hell are you doing??????
05-10-2006, 12:48 PM
#13
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Dec 2002
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Brandon Boomhauer
the 72 sounds like a very nice setup.
just curious, how is the body on it? rust dents/dings etc?
just curious, how is the body on it? rust dents/dings etc?
05-10-2006, 12:52 PM
#15
TECH Addict
Thread Starter
iTrader: (9)
Join Date: Dec 2002
Posts: 2,290
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nine Ball
The '72 looks nice other than some body panel alignment. That would be a cool car to finish up.
whats next???
whats next???
05-10-2006, 12:56 PM
#17
TECH Senior Member
Join Date: Apr 2004
Location: Houston / University of Texas, Austin
Posts: 6,955
Likes: 0
Received 0 Likes
on
0 Posts
joe finish the god damn 72... sell the others but keep that 72, I have been waiting for that thing to hit the streets forever, you are soooo close
