Its show time!!!
#7
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Jun 2006
Location: Columbus, Ohio
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
LOL!! Thanks everyone. Here is what is there:
AFR 205 heads
QTP Long tube headers
QTP catted Y-pipe ( going to have to take of my eibach springs so it will fit)
Yank 3200 stall converter (was going to get a blower but decided to wait) I will probably sell this one and get a 3600 or 3800.
Comp cams custom grind cam shaft 228/232, .588/.595 110+1 XE-R/HR lobes
Head gaskets and other cam install stuff
SLP double roller timing chain
SLP heavy duty oil pump, ported on inlet and outlet
B&M transmission cooler
Humane society Dog (when in the passenger seat adds 150rwhp)
I have been searching high and low to find someone to help me with tuning. THANKS A LOT!!! considering I'm doing my installs with a book in hand I will definitely call them. I'm hoping after the tune I should be at 4:30-4:50rwhp. I already have the 90/90 combo, 3inch cat back, and electronic cutout. Once I put the radials on I'll be bird watching from the starting line
Note:still waiting on STRANGE rear end to be built with 3.73 gears. They ran out of posi's and are not getting any in until 7/12. I ordered it through Billingsley Racing. Amber over there is excellent. I ordered the rear end in May and Amber has been so nice that I dont mind waiting... plus you dont have to take your car apart with them. They supply STRANGE with everything needed.
AFR 205 heads
QTP Long tube headers
QTP catted Y-pipe ( going to have to take of my eibach springs so it will fit)
Yank 3200 stall converter (was going to get a blower but decided to wait) I will probably sell this one and get a 3600 or 3800.
Comp cams custom grind cam shaft 228/232, .588/.595 110+1 XE-R/HR lobes
Head gaskets and other cam install stuff
SLP double roller timing chain
SLP heavy duty oil pump, ported on inlet and outlet
B&M transmission cooler
Humane society Dog (when in the passenger seat adds 150rwhp)
I have been searching high and low to find someone to help me with tuning. THANKS A LOT!!! considering I'm doing my installs with a book in hand I will definitely call them. I'm hoping after the tune I should be at 4:30-4:50rwhp. I already have the 90/90 combo, 3inch cat back, and electronic cutout. Once I put the radials on I'll be bird watching from the starting line
Note:still waiting on STRANGE rear end to be built with 3.73 gears. They ran out of posi's and are not getting any in until 7/12. I ordered it through Billingsley Racing. Amber over there is excellent. I ordered the rear end in May and Amber has been so nice that I dont mind waiting... plus you dont have to take your car apart with them. They supply STRANGE with everything needed.
Trending Topics
#8
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Nice!! I'm still waiting on my heads and cam, but i'm going to run almost the exact same cam as you except i'll be using the LSK Lobe for the intake 228/232 .639/.595 110LSA (+1). Can't wait, definatly post your numbers when your done..
Note: LSK lobes are 227 but i've been told when it's ground it'll be closer to 228 than 227... Still waiting for the cam and card..
Note: LSK lobes are 227 but i've been told when it's ground it'll be closer to 228 than 227... Still waiting for the cam and card..
#9
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Jun 2006
Location: Columbus, Ohio
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mssingkid
Nice!! I'm still waiting on my heads and cam, but i'm going to run almost the exact same cam as you except i'll be using the LSK Lobe for the intake 228/232 .639/.595 110LSA (+1). Can't wait, definatly post your numbers when your done..
Note: LSK lobes are 227 but i've been told when it's ground it'll be closer to 228 than 227... Still waiting for the cam and card..
Note: LSK lobes are 227 but i've been told when it's ground it'll be closer to 228 than 227... Still waiting for the cam and card..
#10
TECH Resident
iTrader: (1)
Join Date: Dec 2004
Location: Brookings, South Dakota
Posts: 927
Received 0 Likes
on
0 Posts
Right on. Thats gonna be one hell of a combo. I am sitting here getting the courage to call TSP and inquire about a couple of there cams.
Bought my wife a sectional sofa on Monday...she is buying me a cam package.....tit for tat. Thats how I got my supercharger on my '92 as well.
Oh....and Humane Society dogs are the best. We got ours there last year and he is such a charactor.
Looking forward to your numbers and you can bet I am gonna
R/
Frat
Bought my wife a sectional sofa on Monday...she is buying me a cam package.....tit for tat. Thats how I got my supercharger on my '92 as well.
Oh....and Humane Society dogs are the best. We got ours there last year and he is such a charactor.
Looking forward to your numbers and you can bet I am gonna
R/
Frat
#11
TECH Enthusiast
iTrader: (7)
Join Date: Apr 2004
Location: Carmel, NY / ATL, GA
Posts: 546
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by xxtheonlyxx
Thanks, I should be able to post my numbers in about 2 weeks. If you can, drop me a line after you get your numbers. Thats a nice cam there!
#12
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Jun 2006
Location: Columbus, Ohio
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Fratsit
Right on. Thats gonna be one hell of a combo. I am sitting here getting the courage to call TSP and inquire about a couple of there cams.
Bought my wife a sectional sofa on Monday...she is buying me a cam package.....tit for tat. Thats how I got my supercharger on my '92 as well.
Oh....and Humane Society dogs are the best. We got ours there last year and he is such a charactor.
Looking forward to your numbers and you can bet I am gonna
R/
Frat
Bought my wife a sectional sofa on Monday...she is buying me a cam package.....tit for tat. Thats how I got my supercharger on my '92 as well.
Oh....and Humane Society dogs are the best. We got ours there last year and he is such a charactor.
Looking forward to your numbers and you can bet I am gonna
R/
Frat
#13
10 Second Club
Thread Starter
iTrader: (22)
Join Date: Jun 2006
Location: Columbus, Ohio
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Mssingkid
Just got the cam in today,Still waiting on my heads from TSP, but i'll be leaving on vacation for two weeks from sunday so i guess the car won't be done till end of july.. Post your numbers when your done!