low end power problem
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2006
Location: oklahoma
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
low end power problem
i installed a set of pacesetter long tubes, a k&n fipk and, and a hypertech programmer and i gained 1 mile per hour and lost a tenth. it doesn't start to really pull until about 3500 rpm do i just need gears or do u think i have a problem
#6
TECH Fanatic
iTrader: (9)
Join Date: Dec 2004
Location: Schaumburg, IL
Posts: 1,693
Likes: 0
Received 0 Likes
on
0 Posts
Get a real tune.. HPP's are junk. Had a buddy that gained .1 in the 1/4 with dynatech headers and and an HPP. Then he got smart and had a basic tune done at speed inc and and knocked off .3. the difference was night and day.
Trending Topics
#10
TECH Senior Member
iTrader: (39)
i was wonderign the same with headers if i am going to lose some low end.. I have TD, with an x pipe and i knwo i lost a little low end. i drove my buddies 02 z with Kooks LTs + O/R H + 1 chmaber flows and his car was beefy under the curve.. Remember i am on stock manifolds for now until i get my QTPs in.. so will i gain some low end back with the LTs??