Help!!! Traction Sucks!!!
#1
Help!!! Traction Sucks!!!
I've got MT DR's, anything over around 3,000+ launch makes me bounce off the rev limiter. I'm only putting out about 420 rwhp. The odd thing is that when I dump the clutch at launch the engine torque lifts the drivers side and goes down on the passangers side. Consequently the drivers side leaves a heavy black burn mark, while the passanger side leaves a much lighter colored burn mark. I have a 9" Detroit locker so I know the power is being distributed equally. I have relocation brackets adjusted to the bottom hole. They have completely eliminated my severe wheel hop. Kevin at MT tells me that their DR's shouldn't be used on M6 cars. How about some input as to why my burn marks are so unequal. Thanks.
#5
10 Second Club
iTrader: (1)
you have a 9'' rear w/dr's? WHY? get some slicks. i run m&h racemaster cheeter slicks www.intercotire.com i pull the front wheels at 6,500rpm's dead hook to 1.42 60 foot times w/ a 3,700bls m6 car. i've tried m/t et street,drags and hoosiers,nothing hooks for me like the m&h does.
Trending Topics
#9
Launching!
iTrader: (4)
Join Date: Dec 2002
Location: southern ohio
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by bigdsz
The reason I don't have slicks is that I've been waiting for PSJ to convince Centerline there is a market for 15X10's where you don't need to grind the calipers. What pray tell is an "antiroll"??? Thanks