Cam degree question
#1
TECH Apprentice
Thread Starter
iTrader: (3)
Join Date: Apr 2004
Location: Ruskin, FL
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Cam degree question
When installing a cam do I really need to degree it? I understand anything worth doing is worth doing right. What I am trying to get at is can I degree the new cam off of where the old cam was?
I did try to do a search but my internet sucks here in Kyrgyzstan.
My error
503 Service Unavailable
The server is temporarily busy, try again later!
------------------------------------------------------------------------
Powered By LiteSpeed Web Server
Lite Speed Technologies is not responsible for administration and contents of this web site!
I did try to do a search but my internet sucks here in Kyrgyzstan.
My error
503 Service Unavailable
The server is temporarily busy, try again later!
------------------------------------------------------------------------
Powered By LiteSpeed Web Server
Lite Speed Technologies is not responsible for administration and contents of this web site!
#2
TECH Resident
iTrader: (1)
Join Date: Nov 2003
Location: Pueblo, Colorado
Posts: 891
Likes: 0
Received 0 Likes
on
0 Posts
You don't need to but I would degree the cam. It will give you the desired ICL. If you order a custom grind I find it very important to degree the cam. If its off the shelf its a bit more forgiving with the extra advance ground in.