Plenty of Room for my Turbo now!!
#1
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Owensboro,Ky
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Plenty of Room for my Turbo now!!
I finally got back on my Trans Am project after 2 year of setting idle. Thats another big story in itself, But its in good hands now at BRC racecraft. I started to do a simple minitub 2 year ago but some how ended up backhalveing it. to now a full out 25.2d chassis. I originally ordered a bickel kit and did all the demo work and build the back half of the tubes, Then project got came to a screeching halt. I took it to brc for to be finished and he took and cut out everything i did from the front hoop forward and added and redid some braces and gusses on the chassis and rearend. He has it looking in a lot better shape now, expecially the main hoop forward now, and rear end also. Im going to go with a 440 inch SBC, with a 115mm. It will have EFI run on straight alchol. NO intercooler. Car will weigh around 2400 pounds. Ill have some more pics in a few weeks. Im gonna try to send my pics as an attachment. If they dont send can some one host them for me or tell me how to post them up regular.
#5
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Owensboro,Ky
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Theres some pics i dont know why it want to dupilcate some of the pics. Yea Johnathon it wasnt that bad at the time, I had to stop cause i had other priorities at the time, had a baby on the way, bought a house and all that, took me some time to recover. I woulda had it done along time ago if it wasnt for all that happening all at once.
Trending Topics
#8
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Owensboro,Ky
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
Hope all the chassis work will be done in a month or so. Then he gotta put all the carbon fibre stuff and the tin work after he paints it. So hopefully this spring it will be ready for paint on the outside then be wired and motor and trans installed and finally racing.
#12
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Owensboro,Ky
Posts: 326
Likes: 0
Received 0 Likes
on
0 Posts
It's Justin. Yea that was few years ago now. That was the best titty bar in the area, to bad they shut now. They passed some stupid law against full nudity or something like that, and they was also offerin special services for a lil extra is what i herd. Im ready to get this car done so i can race again.
It got a big chute 2 of em...
It got a big chute 2 of em...