simple stupid question
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: ABQ, New Mexico
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
simple stupid question
I have a TSP rumbler catback and I want to order a QTP electric cutout.
I know the HP gains aren't going to be much. I want it more for the sound. my question is what size cut out do I need to order? 3"?
I know the HP gains aren't going to be much. I want it more for the sound. my question is what size cut out do I need to order? 3"?
#3
Teching In
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: ABQ, New Mexico
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
its a tsp rumbler and I'm assuming I will mount it in the I pipe there. Should be 3". what is stock size? I searched and I think the stock size pipe is 2.75" right? all QTP offers is 2.5 and 3". should I just order the 3" and put it in the portion of the rumbler?
Never mind. I just looked under the car. The 3" pipe is not long enough to mount a cutout before the muffler. So It will have to go in the stock part of the I pipe. So what size exactly is that? 2.75"?
Never mind. I just looked under the car. The 3" pipe is not long enough to mount a cutout before the muffler. So It will have to go in the stock part of the I pipe. So what size exactly is that? 2.75"?
Last edited by R1LS1; 12-07-2006 at 06:35 PM. Reason: looked at muffler
#6
12 Second Club
iTrader: (3)
Join Date: Jan 2005
Location: Salinas, Ca
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Well budd you cana get 3", but I used to have the Rumbler and I wanted to add a E-Cutout before the bullit, but it couldnt be done the torq arm was in the way and would hang wayy to low. I wanted it before the bullit or else it wouldnt be much of a diffrence. So i sold the cutout.