Darracq

iTrader: (1)

I bought a 2001 ls1 and was expecting ls6 intake, but it has a ls1 intake on it, I pulled it off and it wasnt even sealed down , I asked every damn ? except for the casting # on the intake. He delivered it 3 hours away so i couldnt look at it.

landstuhltaylor

iTrader: (6)

yep, i would

Darracq

iTrader: (1)

Well i hope he makes it right or i have 300 bucks more than i wanted in this engine.

landstuhltaylor

iTrader: (6)

i really dont see how you could do that

Darracq

iTrader: (1)

Now i see that it has 853 heads.

BriancWS6

iTrader: (18)

I would be totally pissed man! I mean that is actually deception isn't it? That would be like selling someone a 88-98 fullsize letting them think it has a 350 when it's actually a 305 cause you swapped it out. That's deceiving and I think you should make him aware that you know and have him compensate you for parts AND labor, or I would try to bring legal action on him if possible.

I mean there could be a chance that it's a sold "as is" deal, and you screwed, but that's still deceitful in my opinon. Good luck man and keep us posted.

BLKWS.6

I would make sure the wrong was righted...

BayAreaSS

iTrader: (10)

I would be pissed!

I would call him and ask him about it and see what could be worked out.

JerseyLS1TA

iTrader: (2)

That sucks, I would be pissed. Thats why you always gotta go look at it first, no matter how far it is IMO.

BLKWS.6

Basically the motor was blown and you got a junkyard take-out from a 98 model car of unknown condition. I would be livid.

DoubleTapDrew

iTrader: (1)

That sucks! A racing buddy bought what he was told was a 327. Pulled the heads months later when he had time to play with it and found out it was a 307

NDFORSPD

is there a serial # you can find on the tranny/engine block to match it back up to the vin....kinda got me nervous!!! Would the build sheet tell you this info too? In your case, is he the orig. owner?

bjamick

iTrader: (31)

man i would be pissed, and i think you prob go a 98-2000 model LS1. Is there places for EGR on the exaust manifold?

y2k_ta

iTrader: (80)

If the intake was just sitting on top of the engine, the engine would run like crap from the huge vacuum leak. Did it run poorly?

Darracq

iTrader: (1)

casting # is 12559378 so it is a 00-01 supposed to be out of a 01 ta.

00formLs1

i would be pissed.

ProKill98

sounds like you bought from Dave.

WS6 Rampage

iTrader: (3)

Deception,......FRAUD! You can sue him for that. Small claims buddy. Tell him that he needs to compensate you or you'll file a small claims suit.

'Trust'

iTrader: (24)

So did you buy a longblock or an actual car?

TopRPM

iTrader: (2)

You cant sue someone over that...

If its a AS-IS deal, well then Im sorry to say it, but your just out...

Plus if you didnt ask if it had an ls6 intake, and what the head casting numbers were, thats also a problem that your just out on...


Although its a 2001 and should have the parts on it, like I already said, if its a as-is no warranty, no refund deal.. Your going to need try and move on!!