SSmokeDaGT

iTrader: (1)

So I finally ordered the set from TSP. I currently have a 2002 Camaro MODS:
M6
Pacesetter LT's
Catted Y-pipe
GMMG (cutout too)
SLP Lid, KN filter
its a 02 so I have the LS6 intake

Installing:
PRC 5.3L heads stage 2.5
224/224 112LSA
Custom Tuning by Ditos Motors

What do you guys think? Any guesses?

brad8266

iTrader: (23)

EDIT: i forgot the heads part, 420

Beasst8

iTrader: (1)

I got the stuff in my sig and it gave me 107 hp to the ground. I know my cam is bigger but maybe you can use it for comparison.

Asmodeus

I'm going to guess 410-415 b/c of the smallish cam.

Screamin_Z

iTrader: (2)

SSmokeDaGT

iTrader: (1)

If I hit 400rwhp Ill be happy.

erikthegoalie

iTrader: (29)

it is a smaller cam...BUT, the 5.3's have a better compression..so, you'll show higher numbers than lets say a LS6 head

Good luck bro

99blancoSS

iTrader: (115)

420 minimum. I put down 410 with said combo on a mustang dyno

john563

iTrader: (17)

Ill be picking up my car in the next day or so.Im getting those heads installed and Ive got that cam too(TR224/112)and mine is also getting a ported fast90/90 to go with it and pulley,but Im an A4.Dont know what it will put down ,but Ill deff.post in the next few days
john

SSmokeDaGT

iTrader: (1)

Thanks john.. Let me know how you do.. Anyone else?

NHRAFORMULA00

iTrader: (2)

Im guessing,410-415 with that combo and a m6.i had the same cam in a a4 with all bolt ons and put down 375,the heads should net you 35-40 hp.GOOD LUCK!!

JimMueller

iTrader: (9)

Jon @ Texas Speed should be shipping my 5.3l stg 2.5 heads any day. My car is practically the same as yours except I currently have Grot headers (planning to switch to QTP), will tune myself, and am ordering a 227/235 110+2 LSK-lobed cam. Jon said it was hard to say without seeing the car, but to expect mid-400's rwhp and around 400rwtq.

WS6TransAm01

iTrader: (13)

When I had 5.3Ltr heads and a CARTEK 3X cam I put down 450/396 to the rear wheels.

That cam is slightly smaller so I would guess 415'ish

TroubledWine3

iTrader: (3)

420 minimum. My guess=432rwhp.

pdd

iTrader: (3)

415rwhp

GregWS6&z28

iTrader: (8)

406.5

ExceSSive

iTrader: (13)

I would guess 410 to 430 depending on the cam...is a TR224 .563 or another vendors 224 with .58x lift?

SSmokeDaGT

iTrader: (1)

224/224 112LSA .581"/.581" from TSP

Demon Of Dreams

iTrader: (3)

anyone have a rough estimate what one would put down with the following setup?

TXSpeed 233/239, .595"/.603"
Stage 2.5 PRC Heads
LT's, Y, GMMG, no air system or egr, and a lid.

would go on a stock 01 SS with no mods thus far in the performance area

SSmokeDaGT

iTrader: (1)

If you don't have a guess or a suggestion, don't try to hijack the thread.. You can always start your own. Thank you, any other guesses or suggestions/comments?