Trev_SS

iTrader: (17)

I need an exhaust shop in the dfw area that can do some real good work. I have a centermount exhaust that i purchased off of the boards and am looking to getting it installed, the problem is that it didn't come with a I-pipe i have a tsp y-pipe on the car right know but i am not really happy with it. The y-pipe really hits the floorboard. I would really like to have the y-pipe just modified so that it will not hit the floorboard. and have a 3 inch -pipe made with a cutout in it to the stock dual/dual muffler on the cme that i bought, i also dont have the hangers that hook to the car for the 2 that hold the cme up. it would need to have some type of hangers made i dont want the cme to wiggle around down there. what are yalls recommendations on where to go, i have heard of mike (V6Bird) and Ray at fortress performance. I was also wondering how much is this gonna run me to get all of this done. thanks

The PAT WS6

iTrader: (14)

8001 rushmore well give u a toot and a tang in ur pipes

01 Red WS6

iTrader: (4)

I'd PM V6 Bird

TX_SS

iTrader: (4)

another vote for V6 bird. hez not cheap but you get what you pay for. hez one of the few ppl i trust.

Trev_SS

iTrader: (17)

I have been talking to v6 bird and i think that i am going to go with his work

mmorrison09

iTrader: (64)

+1 for v6bird

TEX02SS

iTrader: (2)

mike all the way.....i let someone do my CME and i paid for it...literally and figuratively...mike will take care of you

TX_SS

iTrader: (4)

go bring him a FAT CHICK.. he willl do it for free~ LOL

V6 Bird

iTrader: (15)

Its getting warmer. The offer will expire soon. HAHAHAH

Elite_Hot_Rod

Fat chicks and exhaust are Mikes 2 favorite things, lmfao.