98-LS1

iTrader: (4)

I've noticed some of ya'll are using the Trans Am bezel over your gages. Do those just sit in there, are they glued, or do they screw in somehow? How much does the bezel cost and is there any more parts required? I really like how the T/A's have that trim piece in the dash, it gives it some character so I thought I'd install that along with a custom made silver Z-28 and red bowtie emblem. Thanks!

Brian2006

iTrader: (42)

They're held in by tabs but upon removal the tabs break. At least that's what tacreations told me. You can buy them from tacreations for $25

DirtyBird222

iTrader: (7)

I've got an extra one if you'd like to buy it! PM me

DirtyBird222

iTrader: (7)

and yes they fit perfectly

530transam

iTrader: (2)

the tabs dont break why would anyone tell you that? any retard can figure it out its like an arrow head you just push down before you pull them away from the guages and then they snap back into place

Brian2006

iTrader: (42)

I've never done or tried it. I'm just going by what tacreations told me.

3800RS

iTrader: (15)

got pics dirtybird ? email them to me. v6rs97@aol.com

Yahelou

iTrader: (23)

so they fit in camaro gauges without any changing or mods?

6LITEREATER

iTrader: (56)

It takes ONE mod... You PURPOSEFULLY break on of the tabs (top center) so it will sit flush.

I think there was confusion in the above posts around this installation fact .

DirtyBird222

iTrader: (7)

i didn't have to mod anything when I put it on the camaro gauge cluster I put in my car. i can get pics up this weekend, all my parts i grabbed out of my car after my accident are in orlando

z34_nut

iTrader: (7)

I heard that the 97-98 clusters a little different... Will this affect the fit for the bezel from 99+ cars?

The Guz

iTrader: (8)

I have been looking to do this also. Where can one be purchased? I see tacreations. Anywhere else? Looking to do this to my 02 SS.

Thanks,
Mike

98-LS1

iTrader: (4)

I called TA Creations yesterday, the guy was an ***. Said he'd sell me the whole instrument panel for $150.00 but couldn't sell just the Bezel. Like I need the whole damn dash to put this trim piece in my car. BTW, Dirtybird, I'll get with you tomorrow on yours so check your PM's. Thanks man.

DirtyBird222

iTrader: (7)

the only thing different about the 99+ is that they aren't compatible with the PCMs in the 97-98 cars. They added the service vehicle light and moved some other stuff around. Nothing physical has changed so a gauge bezel from a 97 TA should fit a 02 camaro cluster

XtinctZ28

iTrader: (57)

I put one on my 98 Z28 and I did not have to break a damn thing.

No center (or any) tabs were harmed during the install of this bezel:

Brian2006

iTrader: (42)

That's weird cause the guy told me $25 for the bezel with broken tabs. Try calling again and talking to someone else.

superchargedbandit

Ta Dash In A Camaro. I Have Never Seen It.

98-LS1

iTrader: (4)

We are talking about just the gage inlay bezel thing that you lucky T/A owners get and we didn't. It looks cool, better than nothing there at all.

BIG_MIKE2005

iTrader: (116)

Look around some. I believe there is a sweet 69' camaro with a Ebony T/A dash in it on this site or at least pic of it posted.

LSGUNSS

iTrader: (41)

That looks real good but I like my chrome bezel. Here are some pics:




I had this out of the car so I could put red lights in the cluster. I like the look of the red back light like the Pontiac's have.