Quarter stick install with m6 console
03-01-2007, 01:28 PM
#1
On The Tree
Thread Starter
iTrader: (7)
Join Date: May 2005
Location: Greenville, NC
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Quarter stick install with m6 console I know this topic is wanted/asked about alot so i decided to do it
Here's before...and after. It's a 700r4 quarter stick with m6 console.
Went from this ...
to this...
Here's before...and after. It's a 700r4 quarter stick with m6 console.
Went from this ...
to this...
03-01-2007, 01:52 PM
#3
On The Tree
Thread Starter
iTrader: (7)
Join Date: May 2005
Location: Greenville, NC
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
^sorry no pics on how i did it. Although I will tell you i had to space the Shifter up about 2" in the back to get the shifter to be able to clear the edges of the boot opening when in park and first. Trust me..it was a pain..but can be done with a little ingenuity.
Trending Topics
03-02-2007, 12:34 PM
#11
TECH Apprentice
iTrader: (2)
Join Date: Jan 2006
Location: Yelm, Washington
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Looks good, but are you going to fill in the gap that was left. I know you can see bare metal. Also I agree you should remove the shift pattern, may have some one cut one of the manul pattern to sit in its place. But good job!!
