martinsw

iTrader: (3)

I have all my mating connectors, except the interior C220 and C230. I have checked my local autowreckers, but no luck (newest Fbody was like a 96). I checked GM trucks, etc, but could find any.

Anyone know of a source of these connectors (web site, specific vehicles other than 98-02 F body or C5 vetts?

Anyone .....

G-Body

iTrader: (4)

I would try a dealer, or speartech.

Rodder

iTrader: (2)

Or just cut 'em off and put metricpaks or weatherpaks on them. If the connectors are going to be under the hood, you ought to replace them with sealed connectors anyway.

Phoenix 5.7

iTrader: (7)

have u checked caspers also?

martinsw

iTrader: (3)

Thanks for the inputs. I will try the stealership this week, but past experience they will want to sell me a full interior dash harness or something, not just the connectors.

I checked caspers site, but not seeing them there. My last resort will be cut them off and use molex type connectors - the connectors are in the cabin so I don't need the sealed type. It would be nice to keep the same ones, so pin outs, wire color all fit the documentation - but some things don't turn out as nice as I would like.

Phoenix 5.7

iTrader: (7)

caspers has more than on their site. try callin them

daniel6718

iTrader: (36)

junkyard, cut them off, all 93-02 are the same...and even v6 cars i think

Plankwalker71

Mouser electronics has every connector and pin for metripack/delphi connectors.

poconojoe

iTrader: (43)

Part numbers for the connectors for a 2001 F-body, they should all be the same
C220
1206-4769 10-Way F Metri-pack 150 Series (NAT)
1206-4770 10-Way M Metri-pack 150 Series (NAT)

C230
1206-4871 10-Way F Metri-pack 150 Series (BLU)
1206-4872 10-Way M Metri-pack 150 Series (BLU)

Pop N Wood

iTrader: (1)

http://www.keefeperformance.com/high_amp_fuses.html
http://www.rowand.net/Shop/Tech/Auto...Connectors.htm
http://www.auveco.com/
http://www.clipsandfasteners.com/