Red Goat 05

My LS2 is about to get a new cam and heads and some other parts. My new cam is right at .600 valve lift and the heads have double valve springs at somewhere around 140-160 pounds of seat pressure. I know that the factory LS2 rocker arms are nice and strong so Im going to re-use those, but what about the lifters? Can they handle the increased seat pressure?
Thanks for any help.

Nasty N8

iTrader: (33)

They should be just fine for that cam. I would rebuild the rockers though with our Harland Sharp mod $250

Nate

RGKSR

iTrader: (9)

I've got to comment on these rockers!

I sent a set in and was very happy with the finished product!!!!!

Bob K.

Red Goat 05

Those valve covers really look nice. I didnt see anything about the mod for the rockers though.

Red Goat 05

Anybody else got any info on the lifters?

b005td

iTrader: (9)

might as well switch to the caddy racing lifters while u are at it ?

deathtrap

i just bought the ls7 lifters there only $99 cheap ins if you ask me

Red Goat 05

The LS7 lifters are the same size as LS2 but stronger?