1979transam

iTrader: (19)

Alright Guys I Know I Have Posted This Thread A Few Times But This Will Hopfully Be The Last. Okay I Bought The Slp 85mm Maf, And I Got The Slp Smooth Bellow. After Doing Some Triming On The Smooth Bellow I Finaly Got It To Fit But I Had To Force It On There And The Clamps On The Lid. I Got It On There Were It Look Okay And Im Driving Today And It Throws A Code. The Code Was The Car Was Running To Rich. So Am I Doing Something Wrong Or What Do You Guys Think.
If Anyone Could Please Post Some Closeup Pics Of Your Aftermarket Maf On Your Car (slp Maf) If Possible. I Would Very Highly Apprciate It.

Thanks
Billy

greysteel_M6

iTrader: (5)

It's probably the maf itself. Has it not been dialed in? Are you close to stock/tuned? If so, it's an easy fix, put the stock unit back in.

1979transam

iTrader: (19)

my car is bone stock i have a SLP lid, SLP loud mouth, and K&N filter in it thats it. the car has no tune on it.

thanks billy

zuuhlsT/A

iTrader: (2)

Mine didn't throw any codes when I put mine in. Double check your connections, make sure all your clamps are tightened down and your lid is sealing properly.

greysteel_M6

iTrader: (5)

There's nothing to be gained with an aftermarket maf until you're at 450rwhp, otherwise the stock one isn't chocking the system. Sell it for some $.

1979transam

iTrader: (19)

well i got it to go on right today after i tried ever possible way
thank you guys for the help

will it hert the car to take the screen out?

thanks

hndakilr

send it back port the old one

JScamaro

iTrader: (6)

Definitely keep the screen on the maf.

SSmoken

iTrader: (26)

mine fit fine,didnt even have to trim the bellow. and it didnt throw any codes either.

Cruz28

Mine threw cat codes after six months of driving with the SLP MAF and I was only able to fix it with a tune.