Lifter dimples
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Location: Gardnerville, NV.
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Lifter dimples
One one side of the lifter body there's a little dimple that appears to be for oiling. I beleive they were facing up, can someone confirm that?
#5
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Location: Gardnerville, NV.
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
I wonder if these have been built in 90 degree differences? I found many people saying it doesn't matter and a few saying facing front or back. I took pictures which I'll post later that show the oiling port clearly in plane with the roller meaning it can only face up or down. No matter, the port is always exposed to the recessed area which makes up the oil galley at each lifter. I placed them down as this was in direct proximatey to the oil galley in the block.
Trending Topics
#8
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Nov 2003
Location: Gardnerville, NV.
Posts: 1,037
Likes: 0
Received 0 Likes
on
0 Posts
Hopefully we'll be able to light it off tomorrow...Thursday for sure.