383 427 0r 355 kit help please.
#1
383 427 0r 355 kit help please.
I am in the process of trading my z for a 200 trans am and am wondering who makes the best strocker kits for the lowest prices I realy want to do the 427 with low compression so I can boost it later on but I would like some feed back on what you guys have seen or like. please Im not trying to get bs answers. all help is apreciated.
#2
TECH Junkie
iTrader: (5)
Join Date: Feb 2007
Location: Key West, Florida
Posts: 3,183
Likes: 0
Received 0 Likes
on
0 Posts
can't stroke an ls1 block to 427....requires resleeving...which is MEGA $$$$
but you can bore and stroke the ls2 blocks, or step up to an aftermarket block.
still ALOT of $$
my suggestion is to check out several engine builders...www.victoryracingengines.com offers 427 strokers for reasonable cost.
but you can bore and stroke the ls2 blocks, or step up to an aftermarket block.
still ALOT of $$
my suggestion is to check out several engine builders...www.victoryracingengines.com offers 427 strokers for reasonable cost.
#4
Banned
iTrader: (4)
Join Date: Jan 2007
Location: North Ridgeville, Ohio
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
Depending on how much boost and how you are going to go about it there are a lot of different options to choose from. We custom CNC blueprint and build all of our engines in house and offer competitive pricing with unsurpassed quality in our engine program.
If you have any questions at all feel free to drop me an email or a PM on here and I will be sure to get right back to ya!
If you have any questions at all feel free to drop me an email or a PM on here and I will be sure to get right back to ya!
#5
TECH Regular
iTrader: (33)
Join Date: Dec 2006
Location: Dublin Ga
Posts: 495
Likes: 0
Received 0 Likes
on
0 Posts
trust me when i say a 427 and budget dont go together... i am in the middle of building mine again after my mid sleeved LS1 block busted and its costing me a fortune once again. really wish i had gone 408.
Trending Topics
#8
TECH Enthusiast
iTrader: (4)
Join Date: May 2004
Location: Georgia
Posts: 609
Likes: 0
Received 0 Likes
on
0 Posts
The ls1 block can be made a 427, but w/ sleeves, like stated above. Correct the ls2 and lsx iron block could also be made into a 427 too but the ls2 also requires sleeves.
If your going for budget than 383 and 408 would be better. Since you're going to put boost to it, doesn't look like you're going too budget. Either would be a good choice.
#9
The ls1 block can be made a 427, but w/ sleeves, like stated above. Correct the ls2 and lsx iron block could also be made into a 427 too but the ls2 also requires sleeves.
If your going for budget than 383 and 408 would be better. Since you're going to put boost to it, doesn't look like you're going too budget. Either would be a good choice.
If your going for budget than 383 and 408 would be better. Since you're going to put boost to it, doesn't look like you're going too budget. Either would be a good choice.
This will probably be a 2 year build so I can make this motor exactly how I want It also may become part of an old f-body rebuild so Price is unkown as of the moment. I have to see what the fishing season gives me lol. IF any one from maryland or near maryland wants to help my funds you could book a charter fishing trip. but on another note it will be a drawn out build deffinatly so it will be build rite safe and reliable.