best sponser to port my heads.
#1
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: Gloucester VA
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
best sponser to port my heads.
I have a extra set of 241 heads and was going to have them ported. My car is in the shop right now getting a strange 12 bolt installed with 4:11 gears. I would like as little down time as possible. So I was thinking of having these ported. I was going to only do a cam but since I have the heads I figured I would get them ported. So which sponser should I use.
#5
LS1Tech Premium Sponsor
iTrader: (4)
We port customers cylinder heads all the time. Give us a call sometime & we can talk about some of the differences between PRC heads & the competition. I think you'll find tons of good prc results in the dyno section & the 241 heads will use the same port we put into the 5.3l heads!!!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#6
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: Gloucester VA
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
On TEA's sight it looks like they charge 900 and some $'s for a exchange. Most heads seem to start at $1400 and up. That and the fact that I have an extra set of 241 heads was why I asked the question. Just looking for some opinions on which sponser would do the best job and price, also for anyone that has had these heads ported.
#7
TECH Enthusiast
Thread Starter
iTrader: (2)
Join Date: Dec 2006
Location: Gloucester VA
Posts: 696
Likes: 0
Received 0 Likes
on
0 Posts
We port customers cylinder heads all the time. Give us a call sometime & we can talk about some of the differences between PRC heads & the competition. I think you'll find tons of good prc results in the dyno section & the 241 heads will use the same port we put into the 5.3l heads!!!