New N/A best for me-9.62@137
03-30-2008, 11:58 AM
#1
9 Second Club
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
New N/A best for me-9.62@137 2nd time out with the new motor-ran a best of 9.62@137 w/ a 1.32 60'.
Car also went a best 60' of 1.29 and a best mph of 138.
This was off the footbrake at idle.
Can't wait to dial it in with the transbrake.
Car also went a best 60' of 1.29 and a best mph of 138.
This was off the footbrake at idle.
Can't wait to dial it in with the transbrake.
03-30-2008, 04:43 PM
#3
Banned
Join Date: Nov 2001
Location: NJ
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
What a difference a set of plugs make. LOL Congrats Tek. 2 hundred pounds less along with the trans brake = low 9s.
Julio
03-30-2008, 06:10 PM
#5
9 Second Club
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
Ha! yes the plugs made all the difference.
Car has a Cartek 441 hydrolic roller with L92 heads, th350, 12 bolt w/ 3:73 gears
All the usual suspension stuff-BMR k memeber, Hals all around, dual rear airbags and a set of wheelie bars by Carrols Rod and Racecraft.
Hoosier CO6 radial slicks.
Car runs on 110.
There is a vid but I'm waiting on the guy to post it up.
Car has a Cartek 441 hydrolic roller with L92 heads, th350, 12 bolt w/ 3:73 gears
All the usual suspension stuff-BMR k memeber, Hals all around, dual rear airbags and a set of wheelie bars by Carrols Rod and Racecraft.
Hoosier CO6 radial slicks.
Car runs on 110.
There is a vid but I'm waiting on the guy to post it up.
03-30-2008, 08:32 PM
#6
9 Second Club
iTrader: (11)
Join Date: Nov 2001
Location: Back home in Texas!!! (DFW)
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
Ha! yes the plugs made all the difference.
Car has a Cartek 441 hydrolic roller with L92 heads, th350, 12 bolt w/ 3:73 gears
All the usual suspension stuff-BMR k memeber, Hals all around, dual rear airbags and a set of wheelie bars by Carrols Rod and Racecraft.
Hoosier CO6 radial slicks.
Car runs on 110.
There is a vid but I'm waiting on the guy to post it up.
Car has a Cartek 441 hydrolic roller with L92 heads, th350, 12 bolt w/ 3:73 gears
All the usual suspension stuff-BMR k memeber, Hals all around, dual rear airbags and a set of wheelie bars by Carrols Rod and Racecraft.
Hoosier CO6 radial slicks.
Car runs on 110.
There is a vid but I'm waiting on the guy to post it up.
Trending Topics
03-30-2008, 11:40 PM
#9
Banned
Join Date: Nov 2001
Location: NJ
Posts: 511
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the props.
He has a posted LS3 intake.
Yes he does. LOL
Julio
Yes he does. LOL
Julio
04-01-2008, 04:13 PM
#16
9 Second Club
Thread Starter
iTrader: (23)
Join Date: Nov 2003
Posts: 3,377
Likes: 0
Received 0 Likes
on
0 Posts
Car weighed 3240lbs w/ me in it.
I had my shiftlight set at 6400 but by the time I react and shift figure about 65-6600. next time out I am going to see if she likes it shifted higher . She's probably going through the traps at around 67-6800, reason I say that is because in 3rd my 6400 light is coming on soon after the 1000ft mark.
I had my shiftlight set at 6400 but by the time I react and shift figure about 65-6600. next time out I am going to see if she likes it shifted higher . She's probably going through the traps at around 67-6800, reason I say that is because in 3rd my 6400 light is coming on soon after the 1000ft mark.
. 
