94m6Z28

thought i would take a look a little closer to home befor i started a deep serch

ive got. or am building a turbocharged lt1
its a 1994 camaro z/28 m6
3.73's free mods
getting full bolt ons
and an OFI kit running 6-7 intercooled psi

anmd i was wondering if any one would be able to set me up with a safe tune *ie i send you the pcm or a pcm. you doo the magic. i pay you and go form there*

it will be dynoed and fine tuned with a wideband befor i start beating on it too much *with current luck it will die befor then..1's day out snaped trq arm bracked, fixed, 3 day out, blew heater hose. fillied opti full of water.. i love my car*

soo any one that could do this, has done it or is doing it.. please hook me up?

Toronto_LT1

iTrader: (-1)

wow!! turbocharged LT1
where are you located??
try Canadian Performance.they're a sponsor here--------------------------------->>>

VIPERSLYR

I would recomend Dave at Canadain Performance (905) 422 0041 he has a really good tuner and they really know thier stuff they have some really fast street cars thats where im getting my 402 built with an F1R.

Speed Density

iTrader: (38)

Dave DiLuca, the shop owner of CDN Perf just picked up a Dynojet too

Dave J

iTrader: (2)

There is a shop in Scarborough that has done a monster LSX turbo 1500 rwhp ran 7.8`s last year and might touch 7.5 this year he also has another on the go.I cant say there name on here because they are not a sponsor here

Hooper

iTrader: (1)

I, too, would recommend Canadian Performance in Pickering. They use a tuner who is very good with HP Tuners.

94m6Z28

would they be able to do a mail order set up kinda deal??


Im in Kelowna BC

Hooper

iTrader: (1)

You'd need to contact Dave at Canadian Performance.

Dave J

iTrader: (2)

Dont do mail order for a turbo setup not a good idea

94m6Z28

well i need some place to start and id much rather have a bad tune thats going to keep me from wrecking something then leaving it stock, having some local hobie guess his way around and i end up pooching my motor as he learns his way around the lt1

im just looking for a good base that will keep me safe, let me drive it a bit untill i can take it to get the a/f and ever thing els dialed in on the dyno. if i had the time, patients and the money*for when i run it too rich or lean and hurt some thing* to learn to tune my car. i would gladly doo that. but right now i dont and there is nothing like this around this area. there might be a few supercharged cars in the vancouver area. but as far as i know. besides imports there isent much in the way of turbo domestics around here

98nosz28

iTrader: (1)

If Edmonton is not to far for you go to AFI performance there. He did my car and is a great tuner.

soontobeLS1

I am in Kelowna quit often, I went to Calgary for a tune, they do camaros/TA's an vettes and then some, the tuner is good. Just limp it to somewhere and get it done.

Or maybe call MOPAC in Lamgley, I think they have a tuner/dyno.

On s side note, hows the criuse scene in Kelowna...i woould like to get to know some area cars and maybe hit some cruise in's etc.

94m6Z28

ive be tossed around to much with just getting parts from mopac so i dont think ill even think about limping my car over the connecter to get it to those guys. if those placed in calgary or edmonton would send me a mail order so i could get my car there, id think about that. im usualy there for a couple weeks ever summer *yah stampede*

Toronto_LT1

iTrader: (-1)

^^how much power are you expecting to squeeze out of that set-up??if you don't mind me asking.

keep us posted and good luck w/everything.

soontobeLS1

Ya, I have actually been to Calgary twice now, the first time I liked what they did, and the second time I had the cam done, and I figured that they knew my car (had my old tune) and it would be just way less headaches, plus the drive is awesome.

I am sure they could send ya some sorta tune via email...but you would need some sorta handheld or something??? Maybe call around and see. Or, find a good friend with a truck and rent a trailer and tow it there???? I know I was gonna hit TTI performance near Seattle to do a blower, they seemed very helpful.

Good luck.

CAMAROZ28AQUINO

i was talking to dave a couple days ago and they dont do mail order tunes because they dont have the cable to connect the pcm to the tuning software.....

NHRAMAN

iTrader: (1)

MOPAC in Langley.

tk-mpl

iTrader: (1)

I don't know how his reputation is but there is Cam at Light Speed Innovation in Red Deer, Alberta he has a Dyno.

Websy21

iTrader: (34)

Do not do a mail order tune, best thing to do is drive the car with the kit on and with the car making no boost at all. Take the spring out of the wastegate, I would never trust a mail order tune. Even from the best tuner ever, there is so many variables and every car/setup is different!