LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Car stalled what the hell

Thread Tools
 
Search this Thread
 
Old 07-27-2008, 08:55 PM
  #1  
On The Tree
Thread Starter
iTrader: (1)
 
Enforcerws6's Avatar
 
Join Date: Jan 2007
Posts: 183
Likes: 0
Received 0 Likes on 0 Posts
Default Car stalled what the hell

Went to back it out of the garage last night moved 3 feet and stalled. Wouldn't start back up either. Cranked but wouldn't fire O got out and fussed with the wires around the coil and module and it fired back up and ran fine. I can not see anything wrong no cut wires and all the connections look clean.
Anyone ran into this before. I am not 100% sure what I did under the hood is what fixed it but it did start again after words. I took a good insulated screw driver and jiggled all the wires with it running and it didn't stall again after that. I have not had any miss in the engine at all and seems to run ok but my 1/4 time is where a stock car should be and I have full exhaust and some other things and no traction problems.




All times are GMT -5. The time now is 09:43 PM.