Pics of my ported and powdercoated throttle bodies with pricing!Cores in stock!
07-28-2008, 11:02 PM
#1
Pics of my ported and powdercoated throttle bodies with pricing!Cores in stock! Hey all,
I hadn't started a thread in here yet as I didn't have any cores, but now I have some. Thought you all might like to see some of my work and my very competitive pricing as well.
Full race port, along with throttle shaft halfed, etc is $65. Add another $65 and you get powdercoating in the color(s) of your choice on the throttle body itself and the cam gear, along with a polished return spring of course all for a total of $130. Exterior show polishing instead of powdercoating is available for $100. I'm trying to track down a few IAC motors for these cores so I can included a polished IAC motor. I do not epoxy the throttle body, or knife edge the blade as knife edging has been proven to cause idle issues for alot of folks. Core charge is $70.
Porting only: $65
With powdercoat: $130
Powdercoating only on any unit you send:$70
Show polished exterior: $110
Core charge: $65
Rally silver with my custom fbody NBM match on the cam gear, super gloss clear over everything
Candy/Andodized red w/mirror black cam gear
Polished exterior
Mirror Black with "near chrome" cam gear
Mirror black with mirror red cam gear
PM me if you would like to order, I'm glad to help
All my work can be seen at www.thepowderpro.com thanks
Sean
I hadn't started a thread in here yet as I didn't have any cores, but now I have some. Thought you all might like to see some of my work and my very competitive pricing as well.
Full race port, along with throttle shaft halfed, etc is $65. Add another $65 and you get powdercoating in the color(s) of your choice on the throttle body itself and the cam gear, along with a polished return spring of course all for a total of $130. Exterior show polishing instead of powdercoating is available for $100. I'm trying to track down a few IAC motors for these cores so I can included a polished IAC motor. I do not epoxy the throttle body, or knife edge the blade as knife edging has been proven to cause idle issues for alot of folks. Core charge is $70.
Porting only: $65
With powdercoat: $130
Powdercoating only on any unit you send:$70
Show polished exterior: $110
Core charge: $65
Rally silver with my custom fbody NBM match on the cam gear, super gloss clear over everything
Candy/Andodized red w/mirror black cam gear
Polished exterior
Mirror Black with "near chrome" cam gear
Mirror black with mirror red cam gear
PM me if you would like to order, I'm glad to help
All my work can be seen at www.thepowderpro.com thanks
Sean
Last edited by SilverGhost; 09-21-2008 at 09:36 PM.
Trending Topics
09-21-2008, 09:44 PM
#15
some ported and powder coated MAF ends, also available on core exchange on a more limited basis than my throttle bodies.
$45 for powder only, add $35 for porting.
All powdercoated units are shaved on the exterior first, and bolts are polished.
mirror red
my custom match for fbody NBM
gloss white, gloss black
just plain media blasted, pretty cool old school look
$45 for powder only, add $35 for porting.
All powdercoated units are shaved on the exterior first, and bolts are polished.
mirror red
my custom match for fbody NBM
gloss white, gloss black
just plain media blasted, pretty cool old school look
