Finally got some times with the 227 cam and yank 3200
#1
12 Second Club
Thread Starter
iTrader: (3)
Join Date: Dec 2005
Location: C'ville
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
Finally got some times with the 227 cam and yank 3200
Weather= 73* with 87% humidity
Elevation= 1250'
Best Run= 1.834 60' 8.21@84.59 in the 1/8 and 12.87@105.68 in the 1/4
All this on STREET tires at 32 psi...
i thought i would run a little better but i am happy with the 60's...
i tried launching at 2k once and i spun at least 30' so i then started launching from idl and 60's just kept getting better...
Elevation= 1250'
Best Run= 1.834 60' 8.21@84.59 in the 1/8 and 12.87@105.68 in the 1/4
All this on STREET tires at 32 psi...
i thought i would run a little better but i am happy with the 60's...
i tried launching at 2k once and i spun at least 30' so i then started launching from idl and 60's just kept getting better...
#7
Banned
iTrader: (12)
Weather= 73* with 87% humidity
Elevation= 1250'
Best Run= 1.834 60' 8.21@84.59 in the 1/8 and 12.87@105.68 in the 1/4
All this on STREET tires at 32 psi...
i thought i would run a little better but i am happy with the 60's...
i tried launching at 2k once and i spun at least 30' so i then started launching from idl and 60's just kept getting better...
Elevation= 1250'
Best Run= 1.834 60' 8.21@84.59 in the 1/8 and 12.87@105.68 in the 1/4
All this on STREET tires at 32 psi...
i thought i would run a little better but i am happy with the 60's...
i tried launching at 2k once and i spun at least 30' so i then started launching from idl and 60's just kept getting better...
Trending Topics
#8
TECH Regular
iTrader: (1)
Join Date: Mar 2004
Location: Downey, California
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
nice...I couldn't do that with my custom camshaft from AI 8.8 et 80mph.
but that was before i put in my edge 3000 stall but I never ran it with that TC
but my bearing s bit the dust so i'm rebuilding my motor and my custom cam shaft got messed up so i'm thinking about trying that 227 cam out the specs don't look to bad for my pace mids but I have 3.42 gears.
still looking.
but that was before i put in my edge 3000 stall but I never ran it with that TC
but my bearing s bit the dust so i'm rebuilding my motor and my custom cam shaft got messed up so i'm thinking about trying that 227 cam out the specs don't look to bad for my pace mids but I have 3.42 gears.
still looking.
The following users liked this post:
KW Baraka (02-07-2020)
The following 2 users liked this post by KW Baraka:
StealthFormula (02-07-2020), Vicious95Z28 (02-07-2020)
#14
TECH Fanatic
iTrader: (5)
KW, one more option ....
a tech resident "myself" laying in bed in the evening under the influence of some sleeping meds while scrolling through old threads reading up on different subjects and magically thinking that the thread im on is current and I reply🤣🤣🤣
I blame it on the benadryl!😎
a tech resident "myself" laying in bed in the evening under the influence of some sleeping meds while scrolling through old threads reading up on different subjects and magically thinking that the thread im on is current and I reply🤣🤣🤣
I blame it on the benadryl!😎