TT GTO Shakedown 1/8 passes
08-15-2008, 10:51 AM
#1
9 Second Club
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
TT GTO Shakedown 1/8 passes Well the car is finally almost done, but we wanted to go to the track with the unfinished product and make some passes to get some more motivation to really finish the car up.
Setup:
Twin GT42Rs 74mm
Iron 408 Erik Koenig
ETP Heads and custom cam
Custom built TT setup by Transmission Physicians
Custom 9" SRA conversion
Keep in mind these passes were all on low boost and never 100% throttle with pump gas and no A2W intercooler running. This was mostly to test out the rear end and see how the car tracked, There is plenty left in the car even at its current form I bet its got another .5-.7 without any changes and just adding throttle and launching harder.
Anyways here it is... Let me know what you guys think!!!
Keep your sound down if you are worried about some bad language in the beginning of the video... Its got a Sopranos theme to it... LOL Someone made the video for me.
http://videos.mafia-motorsports.com/...f80182a689.htm
Setup:
Twin GT42Rs 74mm
Iron 408 Erik Koenig
ETP Heads and custom cam
Custom built TT setup by Transmission Physicians
Custom 9" SRA conversion
Keep in mind these passes were all on low boost and never 100% throttle with pump gas and no A2W intercooler running. This was mostly to test out the rear end and see how the car tracked, There is plenty left in the car even at its current form I bet its got another .5-.7 without any changes and just adding throttle and launching harder.
Anyways here it is... Let me know what you guys think!!!
Keep your sound down if you are worried about some bad language in the beginning of the video... Its got a Sopranos theme to it... LOL Someone made the video for me.
http://videos.mafia-motorsports.com/...f80182a689.htm
Trending Topics
08-15-2008, 12:25 PM
#9
9 Second Club
Thread Starter
iTrader: (7)
Join Date: Feb 2005
Posts: 866
Likes: 0
Received 0 Likes
on
0 Posts
Gotta tighten the converter before the car has any shot of making it through the 1/4! I'd say another 4-6 weeks before the safety equipment is installed so we can really run the car!
