Here you go guys
Trending Topics
#10
TECH Addict
Thread Starter
iTrader: (5)
Join Date: Jun 2009
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
I was launching today, it'd stick, then break loose again when the converter flashed up. To be fair I'm making 240lb-ft to the ground at lockup now. It's hard to get this girl to stick when the back end's squatting like that.
#12
TECH Addict
Thread Starter
iTrader: (5)
Join Date: Jun 2009
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Might have to finish up the bolt ons to get there but it'll happen.
#15
12 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Renton, WA
Posts: 2,563
Likes: 0
Received 0 Likes
on
0 Posts
Contact Intense racing, and ask about their RASK kit. I don't see it on there site anymore, so I'm not sure if they still sell it. It used to cost about 100.00 and has quick disconnects for street use. Works, much better then blocks.
A lot of GTP guy's were hitting 1.8's/1.7's with the RASK kit and street tires.
Each 1/10 tenth you shave off of your 60ft is 2/10's off the quarter.
A lot of GTP guy's were hitting 1.8's/1.7's with the RASK kit and street tires.
Each 1/10 tenth you shave off of your 60ft is 2/10's off the quarter.
#16
TECH Addict
Thread Starter
iTrader: (5)
Join Date: Jun 2009
Posts: 2,802
Likes: 0
Received 0 Likes
on
0 Posts
Contact Intense racing, and ask about their RASK kit. I don't see it on there site anymore, so I'm not sure if they still sell it. It used to cost about 100.00 and has quick disconnects for street use. Works, much better then blocks.
A lot of GTP guy's were hitting 1.8's/1.7's with the RASK kit and street tires.
Each 1/10 tenth you shave off of your 60ft is 2/10's off the quarter.
A lot of GTP guy's were hitting 1.8's/1.7's with the RASK kit and street tires.
Each 1/10 tenth you shave off of your 60ft is 2/10's off the quarter.
#20
12 Second Club
iTrader: (14)
Join Date: Jun 2007
Location: Renton, WA
Posts: 2,563
Likes: 0
Received 0 Likes
on
0 Posts
Once you do some rockers you'll start pulling a lot more, trust me!
I'm about one weekend away from installing my intake manifold. Gotta leave state for a few weeks though, so It's going to be a little longer. crap!
Here's a few tips (maybe you already know/do?)
Make sure you got your rear tires maxed out and have about a 1/16th of a tank of gas. Also remove your driver side headlight and ditch those floor mats and everything from the trunk. I wanna see you hit 104 mph the next time you go out!
I'm about one weekend away from installing my intake manifold. Gotta leave state for a few weeks though, so It's going to be a little longer. crap!
Here's a few tips (maybe you already know/do?)
Make sure you got your rear tires maxed out and have about a 1/16th of a tank of gas. Also remove your driver side headlight and ditch those floor mats and everything from the trunk. I wanna see you hit 104 mph the next time you go out!