How did you make your vacuum pump system?
#1
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Feb 2006
Location: Round Rock, TX
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
How did you make your vacuum pump system?
Those of you with vacuum pump setups, would you mind sharing which parts you used and any pics of how you mounted the pump and ran the lines? I'm looking to add a vacuum pump in the near future and wanted to get an idea of what all is needed. TIA.
Last edited by Formula383; 10-11-2010 at 10:29 AM.
#2
8 Second Club
iTrader: (4)
http://www.summitracing.com/parts/MOR-22640/
http://www.summitracing.com/parts/MOR-22635/
http://www.summitracing.com/parts/MOR-22633/
http://www.summitracing.com/parts/MOR-63910/
http://www.summitracing.com/parts/MOR-64886/
http://www.summitracing.com/parts/MOR-63857/
You will then need a custom length gilmer belt, (measure at moch up)
You will have to have a custom bracket made to mount to engine
You will need misc -12 fittings and hose (customize to your setup)
You will need a -12 bulkhead fitting for valve cover.
Last but not least you will need a vented (breather style) catch can with -12 fittings
http://www.summitracing.com/parts/MOR-22635/
http://www.summitracing.com/parts/MOR-22633/
http://www.summitracing.com/parts/MOR-63910/
http://www.summitracing.com/parts/MOR-64886/
http://www.summitracing.com/parts/MOR-63857/
You will then need a custom length gilmer belt, (measure at moch up)
You will have to have a custom bracket made to mount to engine
You will need misc -12 fittings and hose (customize to your setup)
You will need a -12 bulkhead fitting for valve cover.
Last but not least you will need a vented (breather style) catch can with -12 fittings
Last edited by Tony Shepherd; 10-14-2010 at 01:33 PM.
#4
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Feb 2006
Location: Round Rock, TX
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
http://www.summitracing.com/parts/MOR-22640/
http://www.summitracing.com/parts/MOR-22635/
http://www.summitracing.com/parts/MOR-22633/
http://www.summitracing.com/parts/MOR-63910/
http://www.summitracing.com/parts/MOR-64886/
http://www.summitracing.com/parts/MOR-63857/
You will then need a custom length gilmer belt, (measure at moch up)
You will have to have a custom bracket made to mount to engine
You will need misc -12 fittings and hose (customize to your setup)
You will need a -12 bulkhead fitting for valve cover.
Last but not least you will need a vented (breather style) catch can with -12 fittings
http://www.summitracing.com/parts/MOR-22635/
http://www.summitracing.com/parts/MOR-22633/
http://www.summitracing.com/parts/MOR-63910/
http://www.summitracing.com/parts/MOR-64886/
http://www.summitracing.com/parts/MOR-63857/
You will then need a custom length gilmer belt, (measure at moch up)
You will have to have a custom bracket made to mount to engine
You will need misc -12 fittings and hose (customize to your setup)
You will need a -12 bulkhead fitting for valve cover.
Last but not least you will need a vented (breather style) catch can with -12 fittings
Trending Topics
#11
Staging Lane
iTrader: (1)
Join Date: Mar 2009
Location: Your Mom's House
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Vaccum pump
Whats up Kyle,its Ryan from the LTX shootout,glad to see you are adding one of these to your engine,you wont be disappointed. I personally have one from GZ motorsports,they can build everything to your specs and they cost a little less than everyone else. Hope to see everyone back at the shootout next year, hopefully with my car this time.
#13
8 Second Club
iTrader: (4)
Whats up Kyle,its Ryan from the LTX shootout,glad to see you are adding one of these to your engine,you wont be disappointed. I personally have one from GZ motorsports,they can build everything to your specs and they cost a little less than everyone else. Hope to see everyone back at the shootout next year, hopefully with my car this time.
How do you like the GZ motorsports kit? Looks like a nice setup.
#14
How much vacuum are you guys pulling and are any of you using the pressure relief valve in the valve cover to keep the vacuum at a specific level?
Also is this a drag car only mod or will it work on a DD street/strip car as well?
Also is this a drag car only mod or will it work on a DD street/strip car as well?
Last edited by 97Z28SS; 10-16-2010 at 07:42 PM.
#15
Staging Lane
iTrader: (1)
Join Date: Mar 2009
Location: Your Mom's House
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
It works great,it still pulls 15 inches of vaccum 3 years later and I drive it on the street every weekend. Glad I could help you guys,I had a lot of fun.
15 is the max you want to pull and yes I run a relief.
15 is the max you want to pull and yes I run a relief.
#16
10 Second Club
Thread Starter
iTrader: (8)
Join Date: Feb 2006
Location: Round Rock, TX
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
Whats up Kyle,its Ryan from the LTX shootout,glad to see you are adding one of these to your engine,you wont be disappointed. I personally have one from GZ motorsports,they can build everything to your specs and they cost a little less than everyone else. Hope to see everyone back at the shootout next year, hopefully with my car this time.
Sounds like I'll be giving the GZ Motorsports guys a call very soon. Thanks for the info!
#18
Just by looking at your mods, it would help you. Might get you another 10rwhp. Helps ring seal and helps cut down on blowby and detonation. Also stops small oil leaks if you have any.