LT1 "Cadillac" custom grind cam only dyno results
#1
FormerVendor
Thread Starter
LT1 "Cadillac" custom grind cam only dyno results
I made up a custom grind cam for a 97 Trans Am WS6 6-speed.
The car is stock with the exception of a K&N filter, MSD wires and a Hooker aerochamber replacement muffler.
The cam is 213/218 @.050. That's all I'll say about the cam <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> . I also installed Comp 1.6 rockers and comp springs/retainers.
The car made 318rwhp and 320rwtq. Peak power was at 6,000, and it made over 300ft lbs of torque from 2,200 to 5,400.
This was with tuning. The car made 308/317 before tuning.
The car sounds like stock and still has stock manifolds/cats/throttle body, etc. The idle is DEAD smooth.
Call us at Speed Inc. if interested. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
The car is stock with the exception of a K&N filter, MSD wires and a Hooker aerochamber replacement muffler.
The cam is 213/218 @.050. That's all I'll say about the cam <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> . I also installed Comp 1.6 rockers and comp springs/retainers.
The car made 318rwhp and 320rwtq. Peak power was at 6,000, and it made over 300ft lbs of torque from 2,200 to 5,400.
This was with tuning. The car made 308/317 before tuning.
The car sounds like stock and still has stock manifolds/cats/throttle body, etc. The idle is DEAD smooth.
Call us at Speed Inc. if interested. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
#5
FormerVendor
Thread Starter
Re: LT1 "Cadillac" custom grind cam only dyno results
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by The Big Show:
<strong> Thats pretty frickin' impressive <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thanks!
I thought it turned out well. Considering most stock 6-speed LT1's dyno in the 260hp/300tq range, this car made some good power for sounding/looking totally stock.
<small>[ February 13, 2003, 09:48 PM: Message edited by: INTMD8 ]</small>
<strong> Thats pretty frickin' impressive <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Thanks!
I thought it turned out well. Considering most stock 6-speed LT1's dyno in the 260hp/300tq range, this car made some good power for sounding/looking totally stock.
<small>[ February 13, 2003, 09:48 PM: Message edited by: INTMD8 ]</small>
#6
TECH Senior Member
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: LT1 "Cadillac" custom grind cam only dyno results
Wow, thats pretty impressive, that could easily whoop on a stock LS1... <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
And you could claim stock, a good pair of heads matched up with that cam and some more bolt ons would make that car interesting.. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
And you could claim stock, a good pair of heads matched up with that cam and some more bolt ons would make that car interesting.. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#7
10 Second Club
iTrader: (8)
Re: LT1 "Cadillac" custom grind cam only dyno results
Those numbers look real close to what my LPE 211 cam gave <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> made over 300RWTQ from off idle to red line <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
VERY VERY Nice <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
VERY VERY Nice <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Trending Topics
#8
Teching In
Join Date: Nov 2002
Location: Lafayette, IN
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: LT1 "Cadillac" custom grind cam only dyno results
INTMD8,
Nice numbers with the cam. In your opinion, what kind of numbers would you hope to see with this cam and a bone stock LT4 car? (96 Corvette Grand Sport)
Thanks,
-Neil
Nice numbers with the cam. In your opinion, what kind of numbers would you hope to see with this cam and a bone stock LT4 car? (96 Corvette Grand Sport)
Thanks,
-Neil
#9
FormerVendor
Thread Starter
Re: LT1 "Cadillac" custom grind cam only dyno results
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by 89foxpilot:
<strong> INTMD8,
Nice numbers with the cam. In your opinion, what kind of numbers would you hope to see with this cam and a bone stock LT4 car? (96 Corvette Grand Sport)
Thanks,
-Neil </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Well, since it picked up around 50-60rwhp on an LT1, I would think you should see a good gain on an LT4 car as well, as it's cam is slightly smaller than the LT1's.
I'm very temped to try this cam in my 97 LT4 SS, but I can't bring myself to do it <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> .
<strong> INTMD8,
Nice numbers with the cam. In your opinion, what kind of numbers would you hope to see with this cam and a bone stock LT4 car? (96 Corvette Grand Sport)
Thanks,
-Neil </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Well, since it picked up around 50-60rwhp on an LT1, I would think you should see a good gain on an LT4 car as well, as it's cam is slightly smaller than the LT1's.
I'm very temped to try this cam in my 97 LT4 SS, but I can't bring myself to do it <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> .
#10
11 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: ky
Posts: 1,029
Likes: 0
Received 0 Likes
on
0 Posts
dont **** with the lt4
it will bring sadness to everyone.lol
im sure to add this cam when i start my lt1 dd build.
so what are you think power will be w/long tubes and a xpipe?
330-340?
it will bring sadness to everyone.lol
im sure to add this cam when i start my lt1 dd build.
so what are you think power will be w/long tubes and a xpipe?
330-340?
#11
Bump. I'm interested in this as well. Would it be detrimental to run it with headers, since it's designed to run with the stock manifolds? I'm trying to plan a rebuild for my motor and would love to use this cam. What type of headers would work best with it?