RaM AiR 97

iTrader: (1)

Car seems to not pull at 6000rpm for a while and then shifts at any gear . I just resently over hauled the tranny and changed stall anybody has had this problem. Help going to dyno tune next week

C_Rules

iTrader: (7)

maybe your cam stops making power after 6k. check the rpm power range on your cam. you're dyno tuner will be able to tell where you cam stops making power and then adjut your shift points accordingly.

the_merv

iTrader: (88)

Yea, is there anything done to the Engine? Stock Cam it's going to fall on it's face at 6000 RPM. Also, is it tuned for them RPM's, the Tranny can be adjusted to shift very nicely for them RPM's.

RaM AiR 97

iTrader: (1)

have a zz-409 cam from tpis 226 in ex 555lift in ex 3500 stall. In park when i rev the engine it red lines at 6300 or 6600 not sure but doesent do that thing. Dont want to drive all the way to the dyno shop and have him tell me you need to fix something on the tranny. So i dont think it would be the cam. kind of hard to explain but seems like if the tranny may be slipping other friends tell me that need to dyno computer doesent know what is going on at such high rpms

the_merv

iTrader: (88)

Could be it needs tune adjustments, or the Tranny is slipping.

RaM AiR 97

iTrader: (1)

Has anybody heard of this problem or experienced it

the merv have you heard of this problem

RaM AiR 97

iTrader: (1)

sorry about those idiots that didnt tune your car properly