H/C/I LT1 alive and running (vid)
#1
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: Bay Area, CA
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
H/C/I LT1 alive and running (vid)
I got it fired a few days ago, just now got a chance to upload the video.
What you're hearing is a custom BRE camshaft through open LTs. The cam is a 22x/23x .6xx/.6xx 10x. Full specs withheld due to respect for Bret.
And it runs like a raped ape
Click here to watch MVI-0367
What you're hearing is a custom BRE camshaft through open LTs. The cam is a 22x/23x .6xx/.6xx 10x. Full specs withheld due to respect for Bret.
And it runs like a raped ape
Click here to watch MVI-0367
Trending Topics
#10
12 Second Club
Thread Starter
iTrader: (1)
Join Date: Jan 2005
Location: Bay Area, CA
Posts: 869
Likes: 0
Received 0 Likes
on
0 Posts
I'll get a better clip later with some rev action, this was her initial startup and I was filling the coolant at the same time lol
Bret specced the cam to be shifted at 6300. That was my request being on a stock bottom end. I'll try taking it as high as 6500 though if I have to.
It's actually alot more aggressive sounding in person, my camera was having problems with it being so loud. I'm going to bring the idle down a little too. It's set a bit high right now.
My goal for the project is 120 mph, but I need to get the tune dialed in. It fouled the driver's side plugs in two days lol.
Thanks for the compliments guys, this thing has been a lot of work and a lot of money
Bret specced the cam to be shifted at 6300. That was my request being on a stock bottom end. I'll try taking it as high as 6500 though if I have to.
My goal for the project is 120 mph, but I need to get the tune dialed in. It fouled the driver's side plugs in two days lol.
Thanks for the compliments guys, this thing has been a lot of work and a lot of money