bricez28

how much does a lt1 car need to beat a ls1 car with a slp lid, cat back, and 4:10s? and really beat him by a few cars...not like 3 feet.

formulakid1

A friend of mine has a Z with LT's, no cats,Bullet w/turn down, 3.73's, 3500 stall and hand controls(he's in a wheel chair)......any way.....he took down a LS1 Z with LT's and a lid (I don't know about the gears).
This was at the local mid-night testing facility about a week ago and I was not there....but several people have stated that it was by 3 cars.

I know that this info is second hand, and I have a way low post count on here....but I trust him and the people that relayed the story to me, but I hope this gives you a direction.

Ohh....almost foregot.....his Z has been lightened a lil. The ac is gone but everything else is there and the hand controls might off set that....plus he has to let the tranny shift itself.

Ls1GenericGuy

match his mods and add like 2 more other mods

joelster

Nitrous will get you there real easy.

wannabess

drag radials and race him from a dig, guarantee it'll be more like 6 cars

BlackScreaminMachine

iTrader: (17)

There is no mention of driveline or how the race will be set, such as from a stop or roll.

Either way the LS1 with a good driver is capable of a low 13, so you need to be running mid 12's to put some car lengths on him. If your a auto and he is a m6 from a stop you will need less mods but if reversed you will need more to out power him.

bricez28

i have a m6 and i usually go from a roll

BlackScreaminMachine

iTrader: (17)

What does the Ls1 have.....? M6 or A4

B4C_LT1

depends on the car.....whether its a manual or an auto

onephatZ28

iTrader: (8)

150 shot of NX, you will have him by 2-3 cars

bricez28

well the only ls1 cars ive raced are m6...so lets say m6.