Finally after 6 months the nitrous is in! (pics and video included)
06-04-2008, 03:06 PM
#1
Finally after 6 months the nitrous is in! (pics and video included) First off let me send a big thank you out to Harris Speed Works, Nitrous Outlet, and Scoggin Dickey! They all helped me more than anyone could ask for and then some. Most of my kit came from HSW back during Christmas time when they had a huge sale. The guys there put up with my constant PM's and calls. I'm also pretty sure I asked them the same question multiple times and they continued to answer without hesitation. My window switch came from NO and it is a thing of beauty! Also Ray@nitrous outlet in particular helped me alot through PM's and h=is helping me right now as a matter of fact. My biggest thanks goes to Scoggin Dickey...he is the one that helped me install the whole thing this past weekend! If it weren't for him helping me wire it all it would have never got done!
Here are pics and vids for you to enjoy.
In case anyone forgot me or what I drive here she is in all her beauty since people usually remember cars.
Time for the good stuff!
Window switch by the PCM
Purge
Here is the bottle
And of course a vid to show off a little bit more!
Here are pics and vids for you to enjoy.In case anyone forgot me or what I drive here she is in all her beauty since people usually remember cars.
Time for the good stuff!
Window switch by the PCM
Purge
Here is the bottle
And of course a vid to show off a little bit more!
Last edited by porksoda; 06-04-2008 at 03:46 PM.
06-04-2008, 03:40 PM
#3
Mod list used to be in sig but I erased it for the "hook & book" thing going on. Anyway here is goes:
cc503
918's
1.6 ProMags
Mac mids
ORY
Magnaflow
cutout
52mm TB
Moroso CAI
BMR LCA. Adj. PHR, relocation brackets
Eibach Prokit
Revalved Bilsteins
OTVC wires
and many nitrous goodies!
HSW Sudden Impact wet kit for LT1
HSW purge kit
HSW bottle heater kit
HSW switch plate for ashtray
HSW FPSS
HSW nitrous filter
Mallory 685 w/ MSD harness
NGK TR6's
Nitrous Outlet dual channel window switch
Nitrous Outlet spare tire bottle mount
Nitrous Outlet "V" purge w/ compression fitting
cc503
918's
1.6 ProMags
Mac mids
ORY
Magnaflow
cutout
52mm TB
Moroso CAI
BMR LCA. Adj. PHR, relocation brackets
Eibach Prokit
Revalved Bilsteins
OTVC wires
and many nitrous goodies!
HSW Sudden Impact wet kit for LT1
HSW purge kit
HSW bottle heater kit
HSW switch plate for ashtray
HSW FPSS
HSW nitrous filter
Mallory 685 w/ MSD harness
NGK TR6's
Nitrous Outlet dual channel window switch
Nitrous Outlet spare tire bottle mount
Nitrous Outlet "V" purge w/ compression fitting
Trending Topics
06-04-2008, 11:02 PM
#9
As for times on motor I have none.
Every time I went out to the track they were having some kind of event or it got rained out. And to make it worse I don't actually have a track in my town. There are 4 tracks that are close to me but when I say close I mean about an hour and a half in any direction so that kinda sucks. I did however put down 285rwhp on a Mustang dyno so whatever that transfers to on a Dynojet? But the guy on revved to like 5200 too so that sucked. As for spraying I'm gonna start with a 100 shot and gradually step up to a 150 on the dyno just to see what kind of numbers I can get and how safe it will be. But for the strip or street it will be 100-125 for most of the time. Can't wait to go to TSP and get on their Dynojet for some better numbers!
The ignition box does hum a little bit in the glove compartment but I just turn up the radio. It did bother me a little bit when I first put it in since I wasn't used to it but eventually I just got used to it so it isn't too noticeable. But at the same time I daily drive with solid motor mounts, poly tranny mount, poly mounts in my suspension pieces and so I'm used to the rattles and such.
That is an air freshener my GF put in my car in the cupholder. LOL and yea Primus does suck! I thought I made that name up myself until people started telling me that was a band's album.
Every time I went out to the track they were having some kind of event or it got rained out. And to make it worse I don't actually have a track in my town. There are 4 tracks that are close to me but when I say close I mean about an hour and a half in any direction so that kinda sucks. I did however put down 285rwhp on a Mustang dyno so whatever that transfers to on a Dynojet? But the guy on revved to like 5200 too so that sucked. As for spraying I'm gonna start with a 100 shot and gradually step up to a 150 on the dyno just to see what kind of numbers I can get and how safe it will be. But for the strip or street it will be 100-125 for most of the time. Can't wait to go to TSP and get on their Dynojet for some better numbers!The ignition box does hum a little bit in the glove compartment but I just turn up the radio. It did bother me a little bit when I first put it in since I wasn't used to it but eventually I just got used to it so it isn't too noticeable. But at the same time I daily drive with solid motor mounts, poly tranny mount, poly mounts in my suspension pieces and so I'm used to the rattles and such.
That is an air freshener my GF put in my car in the cupholder. LOL and yea Primus does suck! I thought I made that name up myself until people started telling me that was a band's album.
Last edited by porksoda; 06-05-2008 at 01:19 AM.
06-05-2008, 12:57 AM
#12
Village Troll 
iTrader: (2)
Depends on your preference. They have a heavy/funk style. The bassist is amazing. Your screen name is a good album as well as Frizzle Fry. One of my favorite songs from them is To Defy the Laws of Tradition. Give it a listen...
Not sure about your other question.
Not sure about your other question.
06-05-2008, 01:03 AM
#13
I'll try to listen to that song now. I listen to a little bit of everything...rap, hip-hop, country, rock, R&B, and a little bit of metal. I do not like the new gayish emo rock stuff thats out now or the really heavy metal music where all I hear is growling and gargling. As for my question it's just a general question for whoever can help me get a gauge.
06-05-2008, 08:15 AM
#16
Yours is a white face autometer pro comp right? I can get you he nitrous pressure gauge in the same series.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
