Demonicbird00

iTrader: (17)

well im trying a lil experiment. im going w/ a gto (mn12) tranny,i already have 4.10s in the rear. so by my calulation, it would be as if i had about a 4.30 gear in the car.

this way i can get my t56 built and be a pro-shifted car w/ 4 gears.

hopefully this turns out great, mods/times in sig.

any input would be great.

thanks
brandon

98 SNAKE EATER

subscribing

ls1 joe

iTrader: (37)

You can not pro shift or faceplate the corvette or gto gears. There is not enough material on the gear to do so. The stock gto setup shifts very fast and smooth. I have a gto tranny in my 2000 camaro street car, and I must say i like the way that it shifts in stock form.

Demonicbird00

iTrader: (17)

im not going to be getting the gto tranny pro shifted, im gonna do that to my stock t56 thats in my car now.

joe ill be in touch w/ you in about 2 months to get my tranny done by you/your bussiness.

thanks
brandon

SuperSport4life

iTrader: (7)

Hmmm I thought the gto had a t-56 in it??? I guess you learn something new every day...

Demonicbird00

iTrader: (17)

it does, the gears in the tranny are different, the same as a c5 z06 tranny.

z-ya

iTrader: (1)

Are those goat trannys a direct bolt in ? I was told quite a bit of adapting needed to
be done to use one in a f body.Whats the skinny Joe?

Demonicbird00

iTrader: (17)

yeah more less a direct bolt in. the little shaft inside the tranny, that the shifter goes into has to be changed.

-brandon

DONAIMIAN

iTrader: (18)

Could you pm me with some more info on this? Do you have any GTO cores laying around or will you accept my T-56 as a core in exchange on one. Money permitting ill try this, or else I think im gona try a faceplated unit.